On EscapeHub, some coins give that money back to you.

What Is Crypto Cashback?

When someone creates a coin on EscapeHub, they make one choice about the creator fee: the money they earn every time somebody trades their coin.

They can keep it. Most creators do. That is normal, and it is the default.

Or they can choose cashback. That means they keep nothing. Every creator fee their coin produces goes back to the traders instead.

The choice is made once, when the coin is created, and it is permanent. There is no button to change it later. There is no function in the code that can change it. A creator who picks cashback has given that money up for the life of the coin, and everyone can see they did.

You Get Your Own Fee Back

This is the part people get wrong, so let us be very clear about it.

Cashback is not a shared pot. You are not earning a slice of other people's trading. You are not being paid from strangers' volume.

You get back the creator fee that your own buys and sells paid. All of it. Not a piece of it, not a share of a pool, not a percentage of a percentage. The fee your trade produced goes to your balance.

If you trade a lot, you get a lot back. If you trade a little, you get a little back. Nobody else's activity changes your number, and yours does not change theirs.

Simple and fair. Your money comes back to you.

Every Buy. Every Sell. Before and After the Coin Goes Live.

Cashback is not just a launch-week promotion.

While the coin is bonding, every single buy and every single sell earns you cashback. No conditions.

After the coin finishes bonding and goes live on the exchange, it keeps going. Trade it on EscapeHub and you keep earning, exactly like before.

One honest note, and it applies only to EVM chains like Base and BSC: once a coin there has gone live, cashback is paid when you trade through EscapeHub. Trade that same coin on an outside exchange or an aggregator instead and that trade earns you no cashback. In exchange, you are not charged the creator fee on it either.

On Solana there is no such limit. After bonding, your coin trades on EscapeSwap, our own exchange, and the cashback goes to the wallet that signs the trade.

Sells count too. A lot of people assume a rebate like this only applies when you buy. Not here. When you sell, that fee comes back to you as well.

Your Cashback Waits For You

Cashback is not sent to your wallet at the moment you trade. It builds up as a balance that belongs to you, and you collect it when you want.

That means:

• No minimum. Any amount can be collected. There is no "reach 50 dollars to withdraw" rule.

• No expiry. It never runs out, never resets, never disappears if you stop trading for six months.

• No lockup, no vesting, no waiting period. It is yours from the second it lands.

• Collecting always pays the full amount. There is no partial claim and no leftovers.

Take it today, take it next year. It is your money either way.

Nobody Can Take It From You

Your cashback is not sitting in a company account waiting for us to release it.

On EVM chains, every cashback balance lives in a small contract with no owner, no admin, and no pause switch. There is no function anywhere that can freeze it, take it, or send it somewhere else. Not by us, not by the creator, not by anyone. The only thing that contract knows how to do is pay you your balance.

On Solana, your cashback is held in an account tied to your wallet address, and the payout is worked out from what you earned and what you already took. Sending money into that account cannot inflate what anyone can withdraw.

The number you see in the app is not a number we made up in a database. It mirrors what the chain says.

One Place. One Number. One Button.

Cashback lives in your Portfolio. That is the only place you collect it, and it is the same on web and mobile.

Not on the coin page. That was on purpose. If you traded twenty cashback coins, you should not have to visit twenty pages and press twenty buttons to get your money.

Instead, one button collects everything you earned across every cashback coin on that chain, in a single transaction. Twenty coins, one press.

On the mobile app it goes one step further: one tap collects everything, on every chain, at once. No hunting, no switching networks, no repeating yourself. That is what having your wallet built into the app is for.

Why Would a Creator Give Their Fee Away?

Because it is a good way to get people to trade your coin.

Think about it from a creator's side. You are launching against thousands of other coins. Everyone has a logo and a Telegram group. What do you actually offer a trader that the next coin does not?

With cashback, the answer is real: trade my coin and the fee comes back to you. Not a promise, not a roadmap, not a giveaway you have to enter. It is written into the coin at creation and it cannot be switched off later.

Creators who believe their coin will do serious volume use this as their hook. They are betting that giving up the fee brings enough traders that the coin wins anyway.

And here is a nice detail: a creator who trades their own coin earns cashback too, exactly like everybody else. They gave up the creator fee, not their right to trade. When they buy their own coin, they are just another trader.

How Ours Is Different

Cashback as an idea is not brand new in crypto. What we built around it is.

It works on every chain we support, not just one. Other launchpads that offer something like this offer it on a single chain. EscapeHub runs on EVM chains and Solana, so cashback works wherever you trade. That is the whole point of being multichain.

All your coins, one balance. You do not track a separate rebate per coin or per phase. Everything you earn across every cashback coin, from the bonding phase and after it goes live, collects together.

It is one thing or the other, enforced by the code. A coin is either a cashback coin or a normal creator-fee coin. It can never be both, and the program rejects any attempt to mix them. Some platforms let both settings be switched on and quietly let one win, which leaves creators thinking they set up something they did not. We would rather the chain say no than let anyone be confused about where their money goes.

If you want the full picture of how creator fees work on EscapeHub, we wrote about that in How Token Creators Earn From Every Trade.

Cashback: Quick Questions

What is token trading cashback? It is the creator fee from your own trades coming back to you. On a cashback coin, the creator earns nothing from creator fees, and that money goes to the people trading instead.

Do I earn from other people's trades? No. You get back the fee your own buys and sells paid. Nothing more, nothing less.

Does it work when I sell, or only when I buy? Both. Every buy and every sell earns cashback.

Where do I collect it? In your Portfolio. It is the only place, on web and on mobile.

Is there a minimum, or does it expire? No minimum and no expiry. Any amount, any time, and it never disappears.

Does it cost anything? Collecting is a normal transaction, so you pay the network fee for it, like any other transaction. On Solana, the very first time you ever earn cashback, your cashback account is created on-chain and there is a small one-time cost for that. It happens once, ever.

How do I know if a coin has cashback? The coin page tells you. Cashback coins are marked, and the page points you to your Portfolio to collect.

Can the creator turn it off later? No. The choice is made when the coin is created and there is no way to change it afterwards.

Get the App

The EscapeHub app puts all of this in your pocket: trade, create, and collect your cashback in one tap.

Get it on Google Play

Stay Connected

• Website: escapehub.ai

• X: @escape_hub

• Telegram: Join the community

EscapeHub - one platform, every chain, more value for you. Your fees, back in your pocket.

Every token launch has the same ugly first minute.

You create your token. You send the link to your community. And before a single real person taps buy, the bots are already in. Snipe bots watch the chain around the clock. The moment a new token appears, they buy - faster than any human can. Minutes later they dump on your community. Your real supporters buy the top. The bots walk away with the profit.

Every launchpad has this problem. EscapeHub is fixing it at the root.

What Is a Whitelisted Token Launch?

When you create a token on EscapeHub, you can now add a whitelist: a list of wallets that are allowed to buy while your token is bonding.

If a wallet is on the list, it buys normally. One tap, nothing extra, no special steps.

If a wallet is not on the list, it cannot buy. Not bots. Not snipers. Not strangers. Nobody - until you decide to open trading to everyone.

Launch to your people first. Open to the world when you are ready.

No Sniper Window: How Whitelisted Launches Block Snipe Bots

This is the part that kills snipe bots.

The whitelist is active from the exact moment your token exists. The token and its whitelist are created in the same transaction. There is no gap between "token is live" and "protection is on". No setup step, no waiting for a list to load, no block where the token sits unprotected.

And this is enforced on-chain, on both Solana and EVM. The gate lives inside the token's own smart contract, not inside our app. A bot cannot dodge it by going around our website - the same chain that created your token is the one that rejects the bot.

You can even bundle your own first buy into that same creation transaction. Your token appears with the gate already up and your buy already done.

A bot that tries to buy a whitelisted token gets rejected before any money moves. It pays its own network fee and gets nothing back. There is nothing to snipe.

And by the time you open trading to the public, your community already owns the bottom of the curve, at the prices you wanted them to get. The moment snipe bots live for is simply gone.

Locked On-Chain. Nobody Can Change It. Not Even Us.

The whitelist is not a setting in our app. It is not a row in a database. It is written into the blockchain itself.

Stored on-chain. The full list of allowed wallets lives on the chain. Anyone can read it and check exactly who is on it. Full transparency.

Checked on-chain. The buy check happens inside the smart contract, not inside our app. A bot that skips our website and goes straight to the chain hits the exact same wall.

Fixed forever. The list is set the moment the token is created. No adding wallets later, no removing, no swapping. Not by the creator, not by EscapeHub, not by anyone.

One-way open. The creator can open trading to everyone - once. After that, the token can never be locked again. No tricks. No re-locking after people bought in.

Creator-signed only. A whitelist can only be attached by the creator's own wallet signing the creation. Nobody can put a list on a token that is not theirs.

This cuts both ways on purpose. You can trust a whitelisted launch because the creator cannot quietly change the rules. And you can trust an open token because it can never be gated again.

One more rule that protects everyone: selling is never restricted. Anyone who holds the token can always sell, whitelist or not. The list controls who gets in early. It never traps anyone.

The Whitelist Limits: 19 Wallets on Solana, 20 on EVM

We like giving real numbers, so here they are:

• Solana: up to 19 wallets per whitelist. If you also bundle your own first buy into the creation transaction, the cap gets smaller - the buy needs space in the same transaction too. The app always shows you the exact number while you build your list.

• EVM chains (Base, Ethereum, Arbitrum, BSC): up to 20 wallets.

• These numbers can change. The Solana cap is not a number we picked - it is how much fits inside one chain transaction. So it can go a little up or down later, and if Solana raises its transaction size limit, the cap rises with it.

• The list can never be edited - only opened to everyone. One button, one direction. So pick your wallets carefully before you launch.

• You do not use up a slot. The creator is always allowed automatically. The app also removes duplicate addresses while you build your list, so no slot is wasted. Every slot goes to your community.

• The whitelist drops on its own when your token bonds. The gate only lives on the bonding curve. The moment your token completes bonding and goes live on the exchange, trading is public for everyone - automatically, on Solana and EVM alike. Nobody has to lift the gate, and nobody can keep it on.

Why so few? Why not 100?

Two reasons. The technical one: the entire list has to fit inside the single transaction that creates your token. That is the whole trick - the list is born with the token, so there is never a moment where it can be tampered with. But chain transactions have a size limit, and the list has to fit inside it.

The fairness one matters just as much: a small list keeps launches honest. If a creator could whitelist 100 of their own wallets, they could trade between their own wallets, make the chart look big and busy, and then dump it all on the public the moment trading opens. A short list gives your community a head start - it cannot fake a real market.

We could have gone bigger with off-chain lists or multi-step setups. We said no. Every extra step is a window for bots and one more thing you have to trust. We chose locked over long.

One more honesty point: the app never cuts your list quietly. You cannot even build a list that is too big - the app stops you at the max while you add addresses. And if your list is fine on its own but too big to combine with a bundled first buy, the app tells you right away: shorten the list, or create first and make your buy right after. Nothing is ever silently dropped. It works the other way too: if a token is whitelisted and you are not on the list, the app tells you before you buy, so you never pay for a buy that was going to be rejected.

What You Can Do With a Whitelisted Launch

Reward your earliest people. Your Telegram OGs, your first hundred followers, the people who were there before anyone cared. They get the bottom of the curve, guaranteed.

Launch with your team and friends. Start the token with people you trust, at fair prices, without racing bots for your own launch.

Buy your project's share early. Many projects need tokens for development, marketing, or community rewards. Whitelist your project wallets and buy that share at the start - with real money, in the open. The list is public on-chain, so everyone can see exactly which wallets bought early. No hidden team wallets. No secret allocations.

Run a hype launch. Tell the world only a few wallets get in before everyone else. Let people compete for the spots.

Collab launches. Building something with another creator or community? Whitelist them. Everyone starts together.

And creators still earn 0.5% of every trade, like always. A whitelist changes who can buy first. It does not change what you earn.

No Launchpad Has Ever Done This

Pump.fun does not have whitelisted launches. BonkFun does not. Four.meme does not.

And it goes further than those three. Some platforms have things they call "whitelists": signup forms, databases, lists someone at the company can edit. That is not this. No launchpad has ever shipped a whitelist that is created together with the token, stored on the chain, enforced by the chain, and impossible for anyone to change.

EscapeHub is the first. We showed it in our launchpad comparison - prelisting with a whitelist was already on the list of things only EscapeHub has. Now you know how it actually works: on-chain, fixed forever, bot-proof. Not a form on a website. Not a promise. A rule the chain itself enforces.

Community Testers Are On It Right Now

This is not a whitepaper feature. Whitelisted launches are built and working, and our community testers are using them right now: creating whitelisted tokens, buying as members, getting rejected as non-members, opening tokens to the public.

They are helping us polish the final details, the same way they tested the mobile app before everyone else. Whitelisted launches will be part of EscapeHub at launch.

Want in early on things like this? Follow the socials below. Announcements land there first.

Whitelisted Token Launches: Quick Questions

What is a whitelisted token launch? A token launch where only the wallets the creator picked can buy at the start. On EscapeHub, the list is stored on the blockchain and enforced by the smart contract itself.

Can the creator change the whitelist after launch? No. The list is fixed the moment the token is created. Nobody can add or remove wallets - not the creator, not EscapeHub. The only action available is opening trading to everyone, once, forever.

Can whitelisted holders sell their tokens? Yes. Selling is never restricted for anyone. The whitelist only controls who can buy while it is active.

When does a whitelisted token open to everyone? Two ways: the creator opens it (one time, permanent), or the token finishes its bonding curve and goes live on the exchange - then trading is public automatically.

How many wallets can be whitelisted? Up to 19 on Solana and up to 20 on EVM chains right now. The Solana number comes from the chain's transaction size and can change over time - the app always shows the current max.

Do whitelisted launches stop snipe bots? Yes. The gate is active from the exact moment the token exists, so there is no window for bots to buy. A bot that is not on the list gets rejected by the chain before any money moves.

Pre-Register the Android App

The EscapeHub Android app is open for pre-registration on Google Play. Sign up now and it will auto-install the moment it goes live.

Pre-register on Google Play

iOS is on the way and will be announced the moment it is ready.

Back the Project Early

There's an ongoing presale at escapehub.ai. People who back EscapeHub now are backing it before mainnet, before whitelisted launches go live for everyone, before everyone else shows up.

Early supporters will get special treatment. Platform rewards. Exclusive perks. The people who believed early will be rewarded.

Stay Connected

• Website: escapehub.ai

• X: @escape_hub

• Telegram: Join the community

EscapeHub - one platform, every chain, more value for you. Your people first.

When a token finishes its bonding curve and graduates, the launchpad usually sends it to an external exchange like Raydium or PancakeSwap. The token lives there now. The exchange takes the fees. The creator who made the token? They stop earning.

That's the moment the launchpad loses control. And it's the moment most creators stop getting paid.

We're not doing that.

EscapeHub Is Building Its Own Exchange on Solana

It's called EscapeSwap, and it's specifically for Solana.

When a Solana token graduates on EscapeHub, instead of being sent to Raydium, it migrates to EscapeSwap automatically. Same chain, same trading experience, same liquidity. But this time, the platform controls the fees, and the creator keeps earning.

On EVM chains (Base, Ethereum, Arbitrum, BSC), graduated tokens go to Uniswap V4 which already handles dynamic fees and creator rewards well. So on EVM, we don't need our own exchange. On Solana, we do.

That's why EscapeSwap exists: to give Solana creators the same kind of post-graduation earnings that EVM creators already get from Uniswap V4.

Creators Keep Earning, Forever

A few articles back we explained how EscapeHub creators earn 0.5% from every trade during the bonding phase. That's already almost double what Pump.fun gives.

But that 0.5% only covers the bonding phase. What happens after?

If the token graduates to an external exchange, the creator's earnings stop. The exchange takes all the fees from that point on. Months later, your token could be doing millions in volume, and you'd see nothing.

With EscapeSwap, that stops being a problem. Your token graduates to OUR exchange. The fees stay on EscapeHub. And you keep earning forever.

Every trade. Every buy. Every sell. Whether your token is brand new or has 50 million in market cap. You keep getting paid.

Smart Fee Tiers That Help Tokens Grow

EscapeSwap doesn't use one flat fee. It uses fee tiers based on market cap.

Small tokens have higher fees (more goes to the creator and platform). As your token grows, fees go down automatically. The bigger your token gets, the cheaper it is to trade.

This is the same idea Pump.fun uses with PumpSwap. We're matching that, but with our own pricing built for EscapeHub creators.

The result: small tokens get rewarded for growing, and big tokens get competitive trading fees. Everyone wins.

Pump.fun Has PumpSwap. We Need EscapeSwap.

Pump.fun built PumpSwap for the same reason we're building EscapeSwap. They realized sending graduated tokens to Raydium meant losing all the post-graduation fees. So they built their own.

We're doing the same, just better:

• Lower platform cut, more to creators

• Dynamic fee tiers that reward growth

• Locked liquidity forever at graduation

• No pool spam - only real EscapeHub graduates get a pool

• Public swaps - anyone can trade, even through aggregators like Jupiter

BonkFun sends tokens to Raydium. Four.meme sends them to PancakeSwap. Their creators stop earning after graduation.

Only Pump.fun and EscapeHub have their own exchange. Now you know why.

Only EscapeHub Can Create Pools. Period.

This is something most people miss. On Raydium, anyone can create a pool. On PancakeSwap, anyone can create a pool. That's how scams happen: someone creates a fake pool with a fake "PEPE" or "DOGE" token, fills it with worthless tokens, and tricks people into buying.

EscapeSwap doesn't work like that. Only the EscapeHub graduation process can create pools. No regular user can. No bot can. No scammer can.

What this means for you:

• Every pool on EscapeSwap is real. It's an EscapeHub-launched token that finished its bonding curve fair and square.

• No fake versions of popular tokens. If you see "DOGE_HUB" on EscapeSwap, that's the actual one. There's no scam clone right next to it.

• One pool per token. No confusion about which pool is the real one. Each token has exactly one official pool.

• Trusted by default. You don't have to research the pool. The fact that it exists on EscapeSwap means it's legit.

This isn't a small detail. It's one of the biggest scam vectors in DeFi, and EscapeSwap closes it.

What Traders Get From This

If you're not creating tokens, EscapeSwap still matters to you.

Locked liquidity forever. When a token graduates to EscapeSwap, the liquidity is locked permanently. Nobody can pull it. Not the creator, not the platform, nobody. Rug pulls are structurally impossible.

Fair pricing. The fees are clear, the math is on-chain, and aggregators like Jupiter can route through EscapeSwap so you always get the best price.

Same token, same chart. When a token graduates from bonding to EscapeSwap, the chart continues without a break. Same history, same data, just a new venue.

How It Works Behind the Scenes

You don't need to understand the technical part, but here's the short version for the curious:

A token starts on EscapeHub's bonding curve. People buy, the price goes up. When the bonding curve finishes (all sellable tokens bought), the liquidity migrates to EscapeSwap in one transaction. The pool opens at the exact same price the bonding curve ended at. No price gap, no graduation cliff.

From that moment on, EscapeSwap handles all trading for that token. Fees flow to the creator, the platform, and the liquidity pool. The creator can claim their fees whenever they want with one click.

That's it. No middlemen, no external exchanges, no lost fees.

Part of the Bigger Picture

A portion of platform fees will be used to buy the EscapeHub token off the market once it's live. EscapeSwap multiplies this.

More volume on EscapeSwap = more fees to the platform = more buybacks for the token = more value for everyone holding it.

Creators earn forever. Traders get fair prices. Token holders benefit from every trade across every graduated token on the platform.

This is the kind of thing you can only build when you control your own exchange.

When?

EscapeSwap is in active development right now. We'll share more updates as it gets closer to launch. The bonding curve, the migration flow, the fee tiers, the pool restrictions - it's all being built to be production-grade from day one.

And here's the important part: this doesn't push back our launch. EscapeSwap is being built in parallel with everything else we're already waiting on. The remaining legal documents need their processing time. Apple's review of our iOS app needs its time. EscapeSwap is being engineered, audited, and tested through that same window. By the time the other pieces are ready, EscapeSwap is ready too.

We're not adding a new milestone in front of you. We're using the existing waiting period to deliver something other launchpads don't have.

The first EscapeHub-graduated token going live on EscapeSwap will be a moment to remember.

Built On Top of a Real, Registered Company

EscapeHub is now officially registered as EscapeHub LLC in the State of Delaware, USA (we wrote about this in our last article). That matters here too.

EscapeSwap isn't being built by an anonymous Solana developer who could vanish next week. It's being built by a real, registered US company. The team has names, an address, and legal accountability.

A lot of the things we are doing right now - the LLC, the App Store reviews, the careful exchange launch - take longer because they go through the real-world checks. That's the cost of doing this properly instead of just slapping something together and praying nothing breaks.

We chose the slower, accountable path on purpose. EscapeSwap will be on Solana mainnet when it's ready, not when it's rushed.

Mobile App Update

The EscapeHub Android app is open for pre-registration on Google Play. Sign up now and it will auto-install the moment it goes live.

Pre-register on Google Play

On iOS: we're still working through Apple's review process. Apple has additional requirements for crypto-related apps, especially around how token creation, trading, and third-party infrastructure are explained. We're preparing the clarifications and required structure properly, so iOS pre-orders haven't opened yet. We'll announce the moment Apple approves it.

Back the Project Early

There's an ongoing presale at escapehub.ai. People who back EscapeHub now are backing it before mainnet, before EscapeSwap goes live, before everyone else shows up.

Early supporters will get special treatment. Platform rewards. Exclusive perks. The people who believed early will be rewarded.

Stay Connected

• Website: escapehub.ai

• X: @escape_hub

• Telegram: Join the community

EscapeHub - one platform, every chain, more value for you. EscapeSwap coming soon.

This is something almost no other token launchpad has done.

What That Actually Means

Crypto has a trust problem. Most projects are anonymous. If they rug you, disappear, or just stop showing up - tough luck. There's nobody to call, nobody to sue, nobody to chase.

EscapeHub being a registered company changes that. We have a real address. Real owners on file with the state. Real legal responsibility for what we do.

If the platform pulls something shady, you can actually do something about it. That's a real difference, not just marketing.

We can also do real business: partnerships, banking, contracts, hiring people properly. The things that let a launchpad grow into something serious.

Why Delaware

We chose Delaware for a reason. Delaware is the gold standard for US business incorporation.

Most of the biggest companies in America are Delaware LLCs or corporations. Apple. Google. Tesla. Meta. The reason is simple: Delaware has the strongest business laws and the most professional legal infrastructure in the world.

When we say we picked Delaware, we mean we picked the most credible option. Not some random offshore registration in a country nobody trusts.

This is the same legal foundation used by the most serious companies in the world. Now EscapeHub is on that same foundation.

What It Doesn't Change

Let's be clear about what stays the same:

• EscapeHub is still decentralized. Tokens still launch on-chain. Smart contracts still run the bonding curves. Liquidity still gets locked forever after graduation.

• We don't control your tokens. Once your token is live, it's yours. We can't freeze it. We can't seize it. We can't shut it down.

• No KYC for users. You can still create a wallet in one tap. You can still launch a token in 60 seconds. You can still trade without anyone asking who you are.

Being a registered company doesn't make us "TradFi" or "Web2". It just means the team behind EscapeHub is real, accountable, and not running from anyone.

You get the trustless on-chain experience. We provide the trustworthy team running it.

The Difference, Side by Side

Look at that table and ask yourself: which one would you trust with your money? Your community? Your launch?

What This Means For You

If you create a token on EscapeHub, you're launching on a platform run by a real, registered company. That's not just for show. It means:

• The team can't pull the rug.

• The platform won't vanish in 6 months.

• Your earnings are coming from a business that operates legally.

• The roadmap we promise is something we are legally accountable for delivering.

If you trade on EscapeHub, the same applies. You're not betting on faceless wallets. You're using a service operated by a real company that wants to be around for a long time.

We're Different Because We Don't Have To Be Anonymous

A lot of crypto teams hide because they're doing something they shouldn't.

EscapeHub doesn't need to hide. We're building something we're proud of. A legitimate launchpad. Real fees. Real creators earning real money. A real product on real chains.

Being public, registered, and accountable is the natural next step. We have nothing to hide and everything to build.

Pre-Register the Android App

While we're talking about being real, here's another real thing: the EscapeHub Android app is open for pre-registration on Google Play.

Pre-register on Google Play

iOS is in App Store review and coming right after.

Back the Project Early

There's an ongoing presale at escapehub.ai. People who back EscapeHub now are backing it before mainnet, before everyone else shows up.

Now that EscapeHub is officially a US company, presale supporters are backing a real business - not just an anonymous wallet hoping for the best.

Early supporters will get special treatment. Platform rewards. Exclusive perks. The people who believed early will be rewarded.

Stay Connected

• Website: escapehub.ai

• X: @escape_hub

• Telegram: Join the community

EscapeHub - one platform, every chain, more value for you. Now officially a registered US company.

EscapeHub flips that. When you launch a token, you don't just create it. You build something that pays you every single time someone trades it.

Welcome to the creator economy on-chain.

The Simple Version

You create a token on EscapeHub. Someone buys it. You earn.

Someone sells it. You earn.

Someone else buys it. You earn again.

Every single trade, you get 0.5% of it. Automatically. On-chain. No middleman.

That's almost double what Pump.fun pays creators (0.3%).

Why This Matters

Think about it for a second.

If your token has $100,000 in trading volume in a day, you earn $500. If it has $1,000,000 in volume, you earn $5,000. If it goes viral and does $10M in volume, you earn $50,000.

For one day.

And it's not just the first day. It's every day. Forever. Through the entire bonding phase. Every buy, every sell, you get paid.

That's not a one-time launch fee. That's an ongoing income stream from something you created in 60 seconds.

How It Actually Works

You don't have to do anything special. The whole thing is built into the smart contract.

When someone trades your token, the contract automatically takes a small fee. 0.5% of that fee goes to you - the creator. The rest goes to the platform (less than what other launchpads take, by the way).

And here's the part that makes EscapeHub different: a portion of the platform fees will be used to buy the EscapeHub token off the open market once it's live. That means every trade on the platform helps push the token price up and rewards the people who back the project. Creators earn. Traders trade. Token holders benefit. Everyone wins.

Your earnings build up on-chain in real time. When you want to take them, you hit the claim button. One transaction, fees in your wallet. No platform holding your money, no payment processor, no "we'll pay you next month". The fees are always yours - you just decide when to grab them.

The Math Other Launchpads Don't Want You to See

Let's compare what creators actually get on each platform:

• EscapeHub: 0.5% of every trade

• Pump.fun: 0.3% of every trade

• BonkFun: 0% - creators get nothing

• Four.meme: 0% - creators get nothing

Same volume. Different income.

If your token does $1M in volume:

• On EscapeHub: you earn $5,000

• On Pump.fun: you earn $3,000

• On BonkFun: you earn nothing

• On Four.meme: you earn nothing

That's the difference between picking the right launchpad and picking the wrong one.

It's Not Just About the Money (But Mostly It Is)

OK, the money is the main thing. Let's be honest about that.

But here's what else you get when you launch on EscapeHub:

A profile. People can see who created the token. Build trust, build a following, build a brand.

Followers. People can follow you across every chain. Launch one good token, get followers, launch another - your audience comes with you.

Comments and a real community. Every token has its own comment section. Your community can talk, share alpha, and grow together.

An activity feed. Your followers see when you launch new tokens. Built-in distribution.

Watchlists. People save your tokens. They come back to check. They trade more.

All of this means more eyes on your token. More eyes means more trades. More trades means more 0.5% in your pocket.

This is the flywheel. Good tokens get more trading. More trading earns creators more money. More money attracts more creators. More creators bring more good tokens.

That's how a real creator economy works.

For the Degens Reading This

If you've launched tokens before, you already know how this works. You build something, it pumps, you take some fees, life is good.

EscapeHub just gives you a better cut. 0.5% instead of 0.3%. Same token, same volume, more money in your pocket.

Plus you're not stuck on one chain. Solana, Base, BSC, Arbitrum, Ethereum - launch wherever your audience is.

Same game, better odds.

For the Builders Reading This

If you've been thinking about launching a token but you weren't sure about the economics - here it is.

You build something good. You promote it. People trade it. You earn from every trade. Forever.

This isn't an exit. This isn't a one-time pump. This is a real income stream from a thing you built. The bigger your token gets, the more you earn. The longer it lives, the more you earn.

You don't need a startup, a team, or VC money. You need an idea, a community, and 60 seconds to launch.

Stop Sleeping on This

Most people don't realize how much money creators are leaving on the table by picking the wrong launchpad.

0.5% sounds small. But across thousands of trades, across millions in volume, it adds up to real money.

EscapeHub built this so creators win. The platform takes less. You take more. Simple.

Pre-Register the Android App

The EscapeHub Android app is opening for pre-registration. Sign up now and Google Play will auto-install it the moment it goes live. No waiting, no checking, no missing the launch.

Pre-register on Google Play

iOS is in App Store review and coming right after.

Back the Project Early

There's an ongoing presale at escapehub.ai. People who back EscapeHub now are backing it before mainnet, before everyone else shows up.

Early supporters will get special treatment. Platform rewards. Exclusive perks. The people who believed early will be rewarded.

Stay Connected

• Website: escapehub.ai

• X: @escape_hub

• Telegram: Join the community

EscapeHub - one platform, every chain, more value for you.

This article breaks it all down. Feature by feature, side by side.

Self-Custody Embedded Wallet

EscapeHub and Pump.fun both use Privy. One tap to create a wallet. No extensions, no seed phrases. Your keys, your wallet.

BonkFun and Four.meme need you to install a separate wallet app before you can do anything.

Signless Transactions

No confirmation popup on every trade. You tap buy, it buys. EscapeHub and Pump.fun both support this.

BonkFun and Four.meme still make you confirm every single transaction. More taps, more waiting.

Native Mobile App (iOS / Android)

EscapeHub and Pump.fun both have real mobile apps on iOS and Android. BonkFun and Four.meme? Browser only.

In-App Fiat On-Ramp (Google Pay, Apple Pay, Card)

Fund your wallet inside the app with Google Pay, Apple Pay, or a credit card. No exchange needed. EscapeHub and Pump.fun both offer this.

BonkFun and Four.meme don't. You need to already have crypto before you can start.

Advanced Creator Fee Management

Manage and control how your creator fees work after launch. EscapeHub and Pump.fun give creators this level of control. BonkFun and Four.meme don't.

Rich Shareable Social Preview

Share a token link on X or Telegram and it shows a rich preview card with the token image, name, and stats. EscapeHub and Pump.fun both do this. BonkFun and Four.meme don't - you just get a plain link.

Social Feed / Follow System

EscapeHub and Pump.fun both have full social features - profiles, feeds, follows, comments, and likes. The difference: on EscapeHub it all works across every chain. Follow someone on Solana, see what they do on Base.

BonkFun and Four.meme only have basic comment sections. No profiles, no follows, no feed.

Creator Fees (Before Bonding)

EscapeHub gives creators almost double what Pump.fun gives. And BonkFun and Four.meme? Creators get nothing at all.

That 0.5% adds up fast. Every buy, every sell - you earn. Through the entire bonding phase. On-chain, automatic, no middleman.

Multi-Chain Token Launchpad

This is the biggest one. Every other launchpad locks you into one chain. EscapeHub is the only one that works on EVM chains and Solana together. And new chains like Tron, Dogecoin, or TON can be added easily.

Multichain on Mobile

Only EscapeHub gives you multichain on your phone. Pump.fun has an app but it's Solana only. BonkFun and Four.meme don't even have apps.

No switching needed. Solana and Base tokens all live in the same feed, same app, same experience. Browse all chains at once, or filter to one. Everything is connected, all from your phone. Nobody else does this.

Customization / Parameters

EscapeHub gives you the most control over your token launch. The other three are basic - what you see is what you get.

Username-Based Identity (Cross-Chain)

One username across every chain. Your identity follows you from Solana to Base to Arbitrum. Only EscapeHub has this.

Vanity Address Mining

Pick a custom-looking address for your token. On Solana, you can make your token address end with whatever you want - "doge", "pepe", "moon", anything. By default, EscapeHub tokens end with "hub". Great for branding. Only EscapeHub has this.

Developer SDK / API

Build tools, bots, dashboards, or integrations on top of the launchpad. Only EscapeHub gives you an SDK and API to do it.

Prelisting Creations With Whitelist

Let specific wallets buy your token before it goes live to everyone. Build hype, reward your community, control your launch. Only EscapeHub has this.

The Verdict

Look at the tables above. EscapeHub has everything Pump.fun has - and then some. Multichain, cross-chain identity, vanity mining, developer tools, higher creator fees, prelisting whitelists. The full package.

Choose Pump.fun if you only care about Solana and want the biggest existing community on that chain.

Choose BonkFun if you want to support the BONK ecosystem on Solana.

Choose Four.meme if you're on BNB Chain and want simple token creation.

Choose EscapeHub if you want everything: every chain, the highest creator fees (0.5%), a real mobile app, cross-chain social features, developer tools, and features nobody else has.

No other launchpad gives you all of this.

Back the Project Early

There's an ongoing presale at escapehub.ai. People who back EscapeHub now are backing it before mainnet, before everyone else shows up.

Early supporters will get special treatment. Platform rewards. Exclusive perks. The people who believed early will be rewarded.

Stay Connected

• Website: escapehub.ai

• X: @escape_hub

• Telegram: Join the community

EscapeHub - one platform, every chain, more value for you.

You open the app. You tap buy. A popup appears. You confirm. Another popup appears. You confirm again. You type your password. You wait. The transaction finally goes through. And that was just one trade.

For an industry obsessed with speed, the mobile experience is painfully slow. Even the launchpads that have a mobile app still make you confirm every single trade. Still stuck on one chain. Still can't fund your wallet without going to an exchange first.

EscapeHub fixes all of it.

Trade Without Confirmations

This is the big one.

On every other crypto app, every single trade asks you to confirm. Tap buy. Confirmation popup. Type password. Wait. Another popup. Confirm again. Repeat for every trade.

On EscapeHub Mobile, you just trade. No popup. No password prompt. No confirmation screen. You tap the button and the trade happens.

Your wallet is still yours. Your money is still safe. Every trade still goes on-chain like it should. It just happens fast. No popup, no waiting, no wasted taps.

It feels like a real app. Tap, tap, tap. Done. You can keep up with the chart instead of fighting with popups.

Get a Wallet in One Tap

No MetaMask. No wallet app to download. No seed phrase to write down and lose.

Open EscapeHub Mobile and tap one button. You have a wallet. You can start trading right now.

Want to use email, Google, or X to sign in? That works too. Pick what you want. Everything is one tap away.

And you don't need any of this to look around. Browse the app, check out tokens, see what people are trading. When you're ready to trade, the wallet is there waiting for you.

Zero downloads. Zero forms. Zero pain.

Fund Your Wallet Inside the App

Most crypto apps have the same broken onboarding flow:

1. Download a wallet app

2. Write down a seed phrase

3. Go to a centralized exchange

4. Sign up

5. Verify your identity

6. Buy some crypto

7. Withdraw to your wallet

8. Wait

9. Finally, trade

Nine steps before you can buy a single token. And every one of them is a reason for someone to give up.

EscapeHub Mobile lets you fund your wallet directly inside the app. Pay with Google Pay, Apple Pay, or a credit card. No exchange accounts. No withdrawals. No waiting. Tap a button, pick your payment method, done. Your wallet is funded and you're ready to trade in under a minute.

Zero to trading. That's the target.

EVM + Solana Today. Any Chain Tomorrow.

EscapeHub Mobile is multichain from day one. Every chain you'd expect is already there in your pocket: Solana, Base, BSC, Arbitrum, Ethereum, and more. Every chain EscapeHub supports on desktop is supported on mobile.

No more picking one chain and being stuck with it. No more needing a different wallet app for every ecosystem. One app in your pocket, every chain, one experience.

For now that means every major EVM chain plus Solana. But here's the real kicker: the way EscapeHub is built, adding new chains is easy. Bitcoin. Dogecoin. Tron. TON. Any of them can be added without rebuilding the app. No other launchpad can say that.

What's in the app today is just the starting point.

Android AND iOS

A lot of crypto projects release on Android first and make iOS users wait months or years. Some never release iOS at all.

EscapeHub Mobile is coming to both Android and iOS at the same time. No "Android users get it first, iOS coming soon". Both platforms, both working, both tested.

Already Being Tested (And We Ship Fast)

This isn't a vague promise about a mobile app that might ship some day. Testers are already using EscapeHub Mobile on both Android and iOS right now. They're trading, creating tokens, and funding wallets inside the app. It works.

And here's the wild part: the team started building the mobile app two weeks ago. Two weeks. Testers are already on version 0.0.29.

Think about that. Most crypto projects take months just to push a small update. EscapeHub pushed 29 builds in 14 days. Fixes, improvements, features - every day.

That's the difference. Other projects sit still. EscapeHub moves fast.

The team is finishing the last round of polish before opening the app up to everyone. It's close. Real close.

What About Pump.fun?

Pump.fun has a mobile app. But it's Solana only. You can't trade on Base, BSC, Arbitrum, or Ethereum. You're stuck on one chain, whether you use their app or their website.

EscapeHub is different. Multichain everywhere. Solana when you want Solana. Base when you want Base. Switch in one tap. No second app, no second wallet, no second account. That's true on the mobile app, and it's true on the web version too.

And multichain is just one thing. EscapeHub has a lot more going for it across the whole platform: lower platform fees, bigger rewards for creators and traders, fair launches by design, and more. A full breakdown is coming in the next articles.

A Real Community in Your Pocket

Mobile isn't just about trading faster. It's also about actually being connected to what's happening.

EscapeHub's full community features come to mobile too:

• Profiles - see who you're trading with

• Follow people - track creators and traders you trust

• Comments and likes - join the conversation around every token

• Activity feed - see what's happening in real time

• Watchlists - save the tokens you care about

• Search - find any token or any user instantly

Everything that makes the desktop app a community instead of a swap interface, now in your pocket.

When Can You Get It?

Very soon.

Testers are on it now. The final round of polish is happening. A public release is right around the corner for both Android and iOS.

The best way to know the moment it drops:

• Website: escapehub.ai

• X: @escape_hub

• Telegram: Join the community

Back the Project Early

There's an ongoing presale at escapehub.ai. People who back EscapeHub now are backing it before mainnet, before the mobile app goes public, before everyone else shows up.

Early supporters will get special treatment. Platform rewards. Exclusive perks. And more that will be announced over time. The people who believed early will be rewarded.

EscapeHub Mobile - trade anywhere, confirm nothing, every chain in your pocket.

Token launchpads changed the game. One click and anyone can launch a token. No coding, no middlemen, no hassle.

But the current platforms have a problem: they take too much and give too little.

High fees. Only one chain. No community. And when something goes wrong, creators and traders are the ones who lose.

EscapeHub is built to fix all of that.

What Is EscapeHub?

EscapeHub is a token launchpad where the people creating and trading tokens keep more of what they earn. It works on multiple chains (EVM and Solana), has built-in social features, and is designed to be fair from the start.

Here's how it works:

1. Create a token in one click. Pick a chain. Enter a name, symbol, and description. Upload an image. Hit deploy. Your token is live and ready to trade in seconds.

2. Trade on a bonding curve. Every token starts on a bonding curve. The price goes up when people buy and goes down when people sell. No need for someone to add liquidity first. Fair pricing from the very first trade.

3. It moves to a real exchange automatically. When the bonding curve fills up, the token moves to a real decentralized exchange on its own. Uniswap V4 on EVM chains. Raydium on Solana. Nobody has to do anything - it just happens. Once it's there, your token shows up on GeckoTerminal, DEXScreener, DexTools, and CoinGecko. Free exposure, zero effort.

4. Liquidity is locked forever. Once the token is on the exchange, the liquidity can never be removed. Not by the creator, not by anyone. It's locked permanently on-chain.

More Fees for You, Less for the Platform

This is the big one.

On Pump.fun, the platform takes a big cut and keeps most of it. Creators get a small share. Traders pay full fees with nothing back.

EscapeHub does the opposite. The platform takes a smaller cut than Pump.fun, and gives a bigger share to the people who actually create and trade tokens.

If you create a token, you earn fees from every trade on it - not just at the start, but forever. More than what Pump.fun gives creators. This happens automatically on-chain. No trust needed, no middleman.

If you trade, you keep more too. Lower platform fees mean more of your money goes into the trade, not into someone else's pocket.

On Pump.fun, the platform wins. On EscapeHub, you do.

Not Just One Chain

Pump.fun only works on Solana. SunPump only works on Tron. Most others pick one chain and that's it.

EscapeHub works on EVM chains and Solana from day one. At launch, that means Base, Ethereum, Arbitrum, BSC, and Solana.

Adding new chains is easy. The way EscapeHub is built, any blockchain can be added - Bitcoin, Tron, Dogecoin, you name it. These aren't empty promises. The architecture makes it simple.

You pick the chain that works for your community. Nobody gets locked out.

A Social Platform, Not Just a Trading Screen

Most launchpads are just a list of tokens and a swap button. EscapeHub is more than that:

• Profiles - set up your name, picture, and links. People can see who they're trading with.

• Follow people - follow creators and traders you like. See what they're buying, creating, and talking about.

• Comments and likes - every token has a comment section. Talk about the project, ask questions, share your thoughts.

• Activity feed - see everything happening in real-time. New tokens, big trades, tokens completing their bonding curve. Filter it to just the people you follow.

• Watchlists - save the tokens you care about. No more scrolling through noise.

• Search - find any token or any user instantly.

This isn't just another place to trade. It's a community.

No Rug Pulls. By Design.

This isn't just a promise - it's how the system works.

There's no pre-mine. No insider tokens. No special deals. Every token starts at the same place, and everyone pays the same price at any given moment.

When a token finishes its bonding curve, it moves to a real exchange automatically. The creator doesn't have to do anything. The liquidity gets locked forever. There is no way to pull the rug because there's nothing to pull.

Every image uploaded goes through content moderation. If it's not appropriate, it gets rejected. No exceptions. The platform stays clean.

Try It Right Now

EscapeHub is live on testnet and everything works:

• Base Sepolia (EVM testnet) - create tokens, trade, watch them go live on Uniswap V4

• Solana Devnet - same experience on Solana

Token creation, trading, social features, portfolios, watchlists, charts, search - it's all there.

Try it here: testapp.escapehub.ai

It's testnet, so it's completely free. Grab some test tokens and see for yourself.

Mainnet Is Coming

EscapeHub is going live on mainnet soon.

Day one chains: Base, Ethereum, Arbitrum, BSC, and Solana. More chains coming after. Stay tuned for the exact date.

Back the Project Early

There's an ongoing presale at escapehub.ai. People who back EscapeHub now are backing it before mainnet, before the hype, before everyone else shows up.

Early supporters won't be forgotten. Presale backers will get special treatment - platform rewards, exclusive perks, and more that will be announced over time. The people who believed early will be rewarded.

More Articles Coming

This is the first in a series leading up to launch. Over the next weeks:

• How bonding curves work and why they're better than traditional launches

• Why rug pulls can't happen on EscapeHub

• How creators earn ongoing money from their tokens

• EscapeHub vs Pump.fun vs the rest - an honest comparison

Follow along:

• X: @escape_hub

• Telegram: Join the community

• Try the testnet: testapp.escapehub.ai

EscapeHub - one platform, every chain, more value for you.

And unlike most launchpad projects, this isn’t an idea or a promise. It’s already being used.

What a Launchpad Is Supposed to Do

At its core, a launchpad should solve one problem: getting a token from creation to real liquidity and real users without friction.

In practice, most launchpads only solve part of that journey. You launch a token in one place, wait for bonding to finish, manually migrate liquidity, then send users somewhere else to trade. Charts live on another site. Discovery happens on Twitter.

EscapeHub was built to remove that fragmentation.

On EscapeHub, the entire lifecycle happens in one system. Tokens are created with bonding curves, discovered in real time across multiple chains, traded directly inside the platform using EscapeHub’s own swap with TradingView charts, and once bonding completes, liquidity is moved straight into a Uniswap v4 pool.

That full flow is not theoretical. It’s what is being tested right now.

Building in Public on Base Sepolia

The EscapeHub Launchpad is currently live on Base Sepolia testnet with more than fifteen community members actively using it.

This is not a closed demo and not a staged beta. Testers are creating tokens, buying and selling, checking profiles, reviewing transaction history, trading through the built-in swap, and using TradingView-powered charts inside the interface. They are also deliberately pushing edge cases, especially around bonding and post-bonding behavior.

Every issue and suggestion feeds directly back into development. Builds are updated continuously, not monthly. Once this phase is complete, public testing will open so anyone can try the platform before mainnet launch.

This is what building in public actually looks like.

What Happens After Bonding (And Why It Matters)

One of the biggest failures of many launchpads is what happens after bonding finishes. Liquidity often sits in limbo. Creators promise to add it “soon.” Traders wait.

EscapeHub removes that uncertainty.

When a token completes its bonding curve on EscapeHub, liquidity is automatically moved into a Uniswap v4 pool. The token becomes instantly tradable on Uniswap without manual steps, delays, or migration risks.

For creators, this removes operational friction.
For traders, it guarantees continuity and real liquidity from the first moment the token graduates.

Features Shaped by Real Pain Points

EscapeHub’s feature set is not driven by buzzwords. It comes directly from long-standing complaints by token creators and early traders.

Creators can buy their own token before it goes live, preventing automated bots from sniping the earliest supply. This protects fair launches and gives creators control from the very first block.

EscapeHub is also introducing user-defined contract address patterns, allowing projects to launch with addresses that are easier to recognize, verify, and brand.

On top of that, creators earn a share of fees generated from trading activity on their tokens through the EscapeHub Launchpad. If a token gains traction, its creator benefits directly from its usage. Incentives are aligned instead of extractive.

Trading Without Leaving the Platform

EscapeHub is not just a place to launch tokens. It includes a full trading interface so users don’t have to leave the platform the moment they want to act.

Inside the Launchpad, users can view TradingView charts across multiple timeframes, inspect token data like price, market cap, volume, holders, and bonding status, review full trade history, and buy or sell with adjustable slippage.

EscapeHub uses its own swap routing and integrates TradingView charts directly into the interface. There are no third-party redirects or external dashboards. When timing matters, that difference is real.

Discovery Across 20+ Chains

EscapeHub is designed as a multi-chain launchpad from day one.

Tokens across more than twenty networks, including Ethereum, Base, BNB, Avalanche, Polygon, Optimism, and Arbitrum, are accessible from a single interface. Discovery is organized into views that surface what is new, what is trending, what is raising, and what has already bonded.

Alongside the main application, EscapeHub also builds chain-specific websites to give each ecosystem its own dedicated space. This approach is already live for token creation tools like basetokencreator.ai, bnbtoken.ai, and moonbeamtoken.ai, and the same model will apply to the Launchpad.

Proof of Execution: Token Creation Is Already Live

You don’t have to take any of this on faith.

Token creation is already live at https://app.escapehub.ai.

This is not a mockup or a preview. Tokens can be created right now, during presale. It’s a concrete example of EscapeHub delivering infrastructure before asking for trust.

How the $ESC Token Fits In

EscapeHub is currently in presale at https://escapehub.ai.

The Launchpad is a core utility of the EscapeHub ecosystem. Platform fees are designed to flow back into the system, including mechanisms that support $ESC through usage-driven demand.

As more tokens launch and more trading activity happens, the ecosystem grows with it. Presale participants are positioning themselves before public launch and before real usage begins to scale.

What Comes Next

Public testing will open soon. Additional chains will roll out. More creator and discovery tools are already in development.

The process stays the same: build, test with real users, iterate, then expand.

The Bottom Line

Many launchpads talk about what they will build.

EscapeHub is already building. A live token creator. A launchpad in active testing. Direct Uniswap v4 integration. Multi-chain discovery. Real users providing real feedback. That’s not a roadmap. That’s a product.

Links

• Main site: https://escapehub.ai

• EscapeHub Presale: https://escapehub.ai

• Token Creator: https://app.escapehub.ai

• Launchpad (testing): Base Sepolia testnet (public link coming soon)

• X/Twitter: https://x.com/escape_hub

This article is for informational purposes only and is not financial advice. Always do your own research.

This guide shows you how to integrate the SDK into React, Vue, and Svelte applications—complete with wallet connections, vanity address mining, and multi-step token configuration wizards.

What is @escapehub/token-creator?

The @escapehub/token-creator SDK is a TypeScript library that handles:

• Token deployment to 40+ EVM-compatible blockchains

• Vanity address mining — generate custom token addresses (e.g., starting with 0xCAFE...)

• Configurable token features — burns, fees, limits, security options

• Chain configuration — built-in factory addresses, RPCs, and explorers for all supported networks

Supported Chains

The SDK supports major networks including:

• Ethereum & Sepolia

• Base & Base Sepolia

• BNB Smart Chain & BSC Testnet

• Polygon & Polygon Amoy

• Arbitrum One & Arbitrum Sepolia

• Avalanche, Fantom, Optimism, and 30+ more

Live Examples

Before diving into code, check out these production implementations:

• bnbtoken.ai/explore — BNB Chain token creator

• moonbeamtoken.ai/explore — Moonbeam token creator

• basetokencreator.ai/explore — Base chain token creator

• app.escapehub.ai/token-creator/explore — Multi-chain creator

Core SDK Usage

The SDK is framework-agnostic. Here's the core pattern used across all frameworks:

Installation

npm install @escapehub/token-creator ethers

Token Deployment

import { deployToken, createDefaultConfig, getChainConfig } from '@escapehub/token-creator';
import { BrowserProvider } from 'ethers';

// Get ethers signer from your wallet provider
const provider = new BrowserProvider(walletClient, walletClient.chain.id);
const signer = await provider.getSigner();

// Build token configuration
const config = createDefaultConfig('My Token', 'MTK', '1000000', ownerAddress, {
  burnEnabled: true,
  feesEnabled: true,
  buyFeeBps: 300,      // 3% buy fee
  sellFeeBps: 300,     // 3% sell fee
  // ... more options
});

// Get chain config (factory address, RPC, explorer, etc.)
const chainConfig = getChainConfig(chainId);

// Deploy the token
const result = await deployToken(signer, config, chainConfig, salt);
console.log('Token deployed:', result.tokenAddress);

Vanity Address Mining

Want your token address to start with 0xDEAD or 0xCAFE? The SDK includes async vanity mining:

import {
  generateSaltAsync,
  getImplementation,
  getMinimalProxyInitCodeHash,
  getChainConfig,
} from '@escapehub/token-creator';

const chainConfig = getChainConfig(chainId);
const implementation = await getImplementation(provider, chainConfig.factoryAddress);
const initCodeHash = getMinimalProxyInitCodeHash(implementation);

const result = await generateSaltAsync(chainConfig.factoryAddress, initCodeHash, {
  pattern: 'CAFE',
  mode: 'prefix',          // or 'suffix', 'contains'
  maxAttempts: 10_000_000,
  onProgress: (attempts, hashRate) => {
    console.log(`Mining: ${attempts} attempts at ${hashRate} H/s`);
  },
});

if (result) {
  console.log('Found address:', result.address);
  console.log('Use this salt:', result.salt);
}

Framework Integrations

Now let's see how to wrap the SDK for each framework. The core logic is identical—only the state management differs.

React Integration

Tech Stack: React 18, TypeScript, wagmi v2, Reown AppKit, Tailwind CSS

Create a custom hook for deployment:

// hooks/useTokenDeploy.ts
import { useState } from 'react';
import { deployToken, createDefaultConfig, getChainConfig } from '@escapehub/token-creator';
import { BrowserProvider } from 'ethers';

export function useTokenDeploy() {
  const [status, setStatus] = useState<'idle' | 'confirming' | 'deploying' | 'success' | 'error'>('idle');
  const [tokenAddress, setTokenAddress] = useState<string | null>(null);
  const [error, setError] = useState<Error | null>(null);

  async function deploy(walletClient: any, formData: TokenFormData, salt?: string) {
    setStatus('confirming');
    try {
      const provider = new BrowserProvider(walletClient, walletClient.chain.id);
      const signer = await provider.getSigner();

      const config = createDefaultConfig(
        formData.name,
        formData.symbol,
        formData.supply,
        formData.owner,
        formData.options
      );

      const chainConfig = getChainConfig(walletClient.chain.id);
      setStatus('deploying');

      const result = await deployToken(signer, config, chainConfig, salt);
      setTokenAddress(result.tokenAddress);
      setStatus('success');
      return result;
    } catch (e) {
      setError(e as Error);
      setStatus('error');
      throw e;
    }
  }

  return { deploy, status, tokenAddress, error };
}

Usage in a component:

function TokenCreator() {
  const { deploy, status, tokenAddress } = useTokenDeploy();

  return (
    <div>
      {status === 'confirming' && <p>Confirm in your wallet...</p>}
      {status === 'deploying' && <p>Deploying token...</p>}
      {status === 'success' && <p>Deployed at: {tokenAddress}</p>}
      <button onClick={() => deploy(walletClient, formData)}>
        Deploy Token
      </button>
    </div>
  );
}

Full demo: github.com/escapehub-ai/token-creator-react

Vue Integration

Tech Stack: Vue 3.5 (Composition API), TypeScript, wagmi v2, Reown AppKit, Tailwind CSS

Create a composable for deployment:

// composables/useTokenDeploy.ts
import { ref } from 'vue';
import { deployToken, createDefaultConfig, getChainConfig } from '@escapehub/token-creator';
import { BrowserProvider } from 'ethers';

export function useTokenDeploy() {
  const status = ref<'idle' | 'confirming' | 'deploying' | 'success' | 'error'>('idle');
  const tokenAddress = ref<string | null>(null);
  const error = ref<Error | null>(null);

  async function deploy(walletClient: any, formData: TokenFormData, salt?: string) {
    status.value = 'confirming';
    try {
      const provider = new BrowserProvider(walletClient, walletClient.chain.id);
      const signer = await provider.getSigner();

      const config = createDefaultConfig(
        formData.name,
        formData.symbol,
        formData.supply,
        formData.owner,
        formData.options
      );

      const chainConfig = getChainConfig(walletClient.chain.id);
      status.value = 'deploying';

      const result = await deployToken(signer, config, chainConfig, salt);
      tokenAddress.value = result.tokenAddress;
      status.value = 'success';
      return result;
    } catch (e) {
      error.value = e as Error;
      status.value = 'error';
      throw e;
    }
  }

  return { deploy, status, tokenAddress, error };
}

Usage in a component:

<script setup lang="ts">
import { useTokenDeploy } from '@/composables/useTokenDeploy';
import { useVanityMining } from '@/composables/useVanityMining';

const { deploy, status, tokenAddress } = useTokenDeploy();
const { mine, salt, mining, progress } = useVanityMining({
  chainId: 11155111,
  pattern: 'CAFE',
  mode: 'prefix',
});

async function handleDeploy() {
  await deploy(walletClient, formData, salt.value);
}
</script>

<template>
  <div>
    <p v-if="status === 'confirming'">Confirm in your wallet...</p>
    <p v-else-if="status === 'success'">Deployed at: {{ tokenAddress }}</p>
    <button @click="handleDeploy">Deploy Token</button>
  </div>
</template>

Full demo: github.com/escapehub-ai/token-creator-vue

Svelte Integration

Tech Stack: SvelteKit 2, Svelte 5 (with runes), TypeScript, @wagmi/core v2, Reown AppKit, Tailwind CSS

Create a store for deployment:

// stores/deploy.ts
import { writable, derived } from 'svelte/store';
import { deployToken, createDefaultConfig, getChainConfig } from '@escapehub/token-creator';
import { BrowserProvider } from 'ethers';

function createDeployStore() {
  const status = writable<'idle' | 'confirming' | 'deploying' | 'success' | 'error'>('idle');
  const tokenAddress = writable<string | null>(null);
  const error = writable<Error | null>(null);

  async function deploy(walletClient: any, formData: TokenFormData, salt?: string) {
    status.set('confirming');
    try {
      const provider = new BrowserProvider(walletClient, walletClient.chain.id);
      const signer = await provider.getSigner();

      const config = createDefaultConfig(
        formData.name,
        formData.symbol,
        formData.supply,
        formData.owner,
        formData.options
      );

      const chainConfig = getChainConfig(walletClient.chain.id);
      status.set('deploying');

      const result = await deployToken(signer, config, chainConfig, salt);
      tokenAddress.set(result.tokenAddress);
      status.set('success');
      return result;
    } catch (e) {
      error.set(e as Error);
      status.set('error');
      throw e;
    }
  }

  return { deploy, status, tokenAddress, error };
}

export const deployStore = createDeployStore();

Usage in a component:

<script lang="ts">
  import { deployStore } from '$lib/stores/deploy';
  import { vanityStore, vanitySalt } from '$lib/stores/vanity';

  const { status, tokenAddress } = deployStore;

  async function handleDeploy() {
    await deployStore.deploy(walletClient, formData, $vanitySalt);
  }
</script>

{#if $status === 'confirming'}
  <p>Confirm in your wallet...</p>
{:else if $status === 'success'}
  <p>Deployed at: {$tokenAddress}</p>
{/if}

<button on:click={handleDeploy}>Deploy Token</button>

Full demo: github.com/escapehub-ai/token-creator-svelte

Project Structure

All three demos follow a similar architecture:

src/
├── components/
│   ├── steps/              # Multi-step wizard
│   │   ├── BasicsStep      # Name, symbol, supply
│   │   ├── FeaturesStep    # Burns, fees, etc.
│   │   ├── FeesStep        # Buy/sell fee configuration
│   │   ├── LimitsStep      # Max wallet, max tx
│   │   ├── SecurityStep    # Anti-bot, blacklist
│   │   ├── AdvancedStep    # Custom options
│   │   ├── VanityStep      # Vanity address mining
│   │   └── ReviewStep      # Final review & deploy
│   └── ui/                 # Reusable components
├── [hooks|composables|stores]/
│   ├── useTokenDeploy      # Deployment logic
│   └── useVanityMining     # Vanity mining logic
├── config/
│   └── web3.ts             # Wallet configuration
└── types.ts                # TypeScript definitions

Token Features

The SDK supports extensive token customization:

Prerequisites

To run any of the demos:

1. Node.js 18+

2. Reown Project ID — Get one free at cloud.reown.com

# Clone any demo
git clone https://github.com/escapehub-ai/token-creator-react
cd token-creator-react

# Install dependencies
npm install

# Configure environment
cp .env.example .env
# Add your VITE_REOWN_PROJECT_ID to .env

# Start dev server
npm run dev

Resources

• NPM Package: npmjs.com/package/@escapehub/token-creator

• Documentation: app.escapehub.ai/docs

• React Demo: github.com/escapehub-ai/token-creator-react

• Vue Demo: github.com/escapehub-ai/token-creator-vue

• Svelte Demo: github.com/escapehub-ai/token-creator-svelte

Conclusion

The @escapehub/token-creator SDK abstracts away the complexity of ERC20 token deployment while giving you full control over token features. Whether you're building with React, Vue, or Svelte, the integration pattern is straightforward:

1. Install the SDK

2. Create a wrapper (hook/composable/store) for state management

3. Use createDefaultConfig() to build your token config

4. Call deployToken() with an ethers signer

The demos provide production-ready starting points with wallet connections, multi-step wizards, and vanity mining already implemented.

Happy building!

Tags: ethereum, erc20, token, web3, react, vue, svelte, blockchain, smart-contracts, typescript

What is a Vanity Contract Address?

Every smart contract on Base (and Ethereum) gets an address - a 40-character hexadecimal string like:

A vanity address is a contract address that contains readable patterns you choose:

0xBA5E7a3f8b2c9d1e4f5a6b7c8d9e0f1a2b3c1337
    ^^^^                                                               ^^^^
    prefix                                                            suffix

Instead of random gibberish, your token contract can start with 0xBA5E, 0xDEAD, 0xCAFE, or end with BEEF, 1337, BABE - whatever fits your brand.

Why Vanity Addresses Matter

1. Instant Brand Recognition

Which token looks more legitimate?

Token A: 0x7a3f8b2c9d1e4f5a6b7c8d9e0f1a2b3c4d5e6f7a
Token B: 0xBA5E7a3f8b2c9d1e4f5a6b7c8d9e0f1a2b3cDEAD

Token B is instantly memorable. When users see 0xBA5E...DEAD in their wallet, they remember your project.

2. Anti-Scam Protection

Scammers often deploy fake tokens with similar names. A vanity address is nearly impossible to replicate - it's like a built-in trademark.

3. Marketing Power

Imagine sharing your contract address on Twitter:

"Our token just launched! Contract: 0xACE...FACE"

That's content that gets shared. A random hex string? Nobody's retweeting that.

4. Meme Potential

For meme coins, the address IS part of the meme:

• Dog coin? 0xD06E...

• Dead vibes? 0xDEAD...

• Coffee themed? 0xCAFE...

How Vanity Addresses Work (The Technical Part)

Normal contract deployment uses your wallet address and a nonce to determine the contract address. You get whatever address the math produces - no control.

CREATE2 changes everything.

CREATE2 is an Ethereum opcode that lets you pre-compute a contract address using:

• Deployer address (the factory contract)

• A salt (random bytes you can choose)

• Contract bytecode

By trying different salts, you can find one that produces an address with your desired pattern. This is called vanity mining.

The Math

address = keccak256(0xff ++ deployer ++ salt ++ keccak256(bytecode))[12:]

Our servers test millions of salts per second until they find one where the resulting address matches your pattern.

Short patterns (2-3 characters): Instant Medium patterns (4 characters): A few seconds Long patterns (5 characters): Up to a few minutes

Step-by-Step: Create Your Vanity Token on Base

Step 1: Go to Base Token Creator

Visit basetokencreator.ai and click Create Token (or use the menu).

Step 2: Choose Your Mode

Select your creation mode:

• Simple - Quick launch with basic settings

• Safe - Recommended settings with community-first features

• Advanced - Full control over all token features

Step 3: Fill In Token Details

Enter your token information:

• Name: e.g., "Rocket Token"

• Symbol: e.g., "ROCKET"

• Total Supply: e.g., "1,000,000,000"

Configure any additional features based on your chosen mode.

Step 4: Upload Logo & Banner (Optional)

Add branding to make your token stand out:

• Logo: Square image for your token icon

• Banner: Wide image for your token card

These appear on the launchpad and token detail pages.

Step 5: Enable Vanity Address

In the deployment section, toggle on Vanity Address and enter your pattern:

• Prefix: Your address starts with your pattern → 0xDEAD...

• Suffix: Your address ends with your pattern → ...BEEF

Valid characters: 0-9 and A-F only

Popular choices: DEAD, CAFE, BA5E, BABE, FACE, 1337, BEEF

Step 6: Find Your Address

Click Find Address and wait a few seconds. The system automatically finds a matching address for you.

Step 7: Connect Wallet & Deploy

Connect your wallet, review your token configuration, and click Deploy.

Your token launches with your custom vanity address - guaranteed.

Vanity Pattern Ideas

Prefix Examples (start of address)

• 0xDEAD... - edgy/meme vibes

• 0xCAFE... - coffee themed

• 0xBA5E... - perfect for Base

• 0xD06E... - dog coins

• 0xDA0... - DAO tokens

• 0xDEF1... - DeFi protocols

• 0xACE... - elite status

Suffix Examples (end of address)

• ...BEEF - classic hex word

• ...BABE - playful

• ...FACE - social/identity

• ...FADE - artistic

• ...1337 - leet speak

Classic Hex Words

These work great because they're real words in hex: CAFE, FACE, BABE, DEAD, BEEF, FADE, ACE, BED, ADD, BAD, DAD, FED

How Long Does It Take?

• 2-3 characters: Instant (under 5 seconds)

• 4 characters: A few seconds to a minute

• 5 characters: 1-5 minutes

Recommendation: 4 characters is the sweet spot - memorable and fast.

Real Examples

Tokens deployed with vanity addresses on Base:

Each one is instantly recognizable and impossible to forget.

Why Base for Vanity Tokens?

Cheap to Deploy

• Ethereum mainnet: $50-200 for deployment

• Base: $0.10-0.50

You can experiment with vanity mining without worrying about gas costs.

Fast Confirmations

2-second block times mean your token is live almost instantly after deployment.

Coinbase Ecosystem

Direct integration with Coinbase Wallet means your vanity address shows up beautifully for millions of users.

Growing DEX Ecosystem

List on Uniswap, Aerodrome, BaseSwap - all the major DEXs are on Base.

Advanced: Combining Vanity with Token Features

Vanity addresses aren't just cosmetic - you can combine them with powerful tokenomics:

Anti-Bot + Vanity

Deploy 0x5AFE... and actually make it safe with deadblock protection that burns sniper tokens.

Fee Token + Vanity

Launch 0xFEE5... with configured buy/sell fees - the address tells users exactly what to expect.

Limited Supply + Vanity

Create 0xACE...FACE with a hard cap and no minting - provably scarce from the contract address itself.

Frequently Asked Questions

Q: Is the vanity address permanent? Yes. CREATE2 addresses are deterministic. Your salt will always produce that exact address on Base.

Q: Can someone else get the same address? No. The address is derived from the factory contract, your specific bytecode (token configuration), and your salt. Even if someone else finds the same salt, their token configuration would produce a different address.

Q: Does vanity mining cost extra? No. Vanity address generation is included for free. You only pay the normal $1 deployment fee + gas.

Q: What if I want a 6+ character pattern? Technically possible but could take hours or days. We recommend 5 characters max for practical mining times.

Q: Is CREATE2 safe? Yes. CREATE2 has been part of Ethereum since 2019 and is used by major protocols like Uniswap (for LP pairs) and Safe (for smart wallets).

Start Mining Your Vanity Address

Ready to deploy a token with a memorable address?

Create Your Vanity Token on Base →

Pick your pattern. Mine your salt. Launch your token.

No coding. No developers. Just you and your perfect address.

Links

• Base Token Creator: basetokencreator.ai

• Explore Tokens: basetokencreator.ai/explore

• Powered By: escapehub.ai

• Twitter: @escape_hub

• Telegram: t.me/escapehub_official

Tags: #VanityAddress #CREATE2 #Base #Coinbase #TokenCreator #SmartContract #CustomAddress #ERC20 #Web3 #Blockchain #NoCoding #BaseChain

The First Token Generator With Real Power

Most token creators give you the basics: name, symbol, supply. Maybe a mint function if you're lucky.

BNB Token Creator is different.

We're the first no-code platform that gives you access to features previously only available to Solidity developers:

• Anti-bot protection with multiple modes (block, burn, or fee snipers)

• Configurable buy/sell/transfer fees with auto-distribution

• Anti-dump mechanisms with absolute and percentage limits

• Whitelist modes (disabled, auto-disable after launch, always active)

• Cooldown periods, max wallet, max transaction limits

• And the killer feature: Vanity Addresses

Why BNB Smart Chain?

BNB Smart Chain (BSC) remains one of the most popular blockchains for token launches, and for good reason:

• Dirt-cheap gas fees - Deploy a token for less than $0.50

• Lightning-fast transactions - 3-second block times

• Massive ecosystem - PancakeSwap, Venus, and thousands of DeFi apps

• Huge user base - Millions of active wallets

• Easy onboarding - Most crypto users already have BNB

Whether you're launching a meme coin, a utility token, or a community project - BSC is where the action is.

The Old Way vs. The New Way

The Old Way (Hours/Days)

1. Learn Solidity
2. Set up development environment
3. Write token contract
4. Write tests
5. Deploy to testnet
6. Debug issues
7. Deploy to mainnet
8. Verify on BscScan
9. Hope you didn't miss a vulnerability

The New Way (2 Minutes)

1. Visit bnbtoken.ai
2. Connect wallet
3. Fill in token details
4. Click deploy
5. Done ✓

Introducing BNB Token Creator

BNB Token Creator is a no-code platform that makes token deployment accessible to everyone - not just developers.

Three Modes for Every Use Case

1. Simple Mode

Best for: Meme coins, basic tokens, quick launches

Just enter:

• Token name

• Symbol

• Total supply

Deploy in 30 seconds. Perfect for when you just need a token without the complexity.

2. Safe Mode

Best for: Community tokens, fair launches, trust-building

Pre-configured with investor-friendly settings:

• Fixed supply (no minting)

• No hidden owner functions

• Option to renounce ownership

• Transparent and verifiable

Show your community you're building something legitimate.

3. Advanced Mode

Best for: Complex tokenomics, DeFi projects, experienced launchers

Full control over:

• Buy/sell/transfer fees

• Max wallet and transaction limits

• Anti-bot protection

• Whitelist/blacklist functionality

• Anti-dump mechanisms

• And much more...

Build exactly what you envision.

Features at Your Fingertips

Trading Controls

• Buy Fee - Collect a percentage on every purchase

• Sell Fee - Collect a percentage on every sale

• Transfer Fee - Optional fee on wallet-to-wallet transfers

• Max Transaction - Limit how much can be traded at once

• Max Wallet - Prevent whales from accumulating too much

• Cooldown - Rate-limit trades per wallet

Security Modules

• Deadblock Protection - Block snipers during the first N blocks

• Blacklist - Block malicious addresses

• Whitelist - Restrict trading to approved addresses

• Anti-Dump - Limit sell amounts per time period

• Pausable - Emergency stop all transfers

Token Capabilities

• Burnable - Allow holders to burn tokens

• Mintable - Create additional supply (owner only)

• Permit (EIP-2612) - Gasless approvals

All features are optional. Enable only what you need.

Vanity Addresses: Make Your Token Memorable

Here's something no other token creator offers: custom vanity addresses.

Instead of a random contract address like:

You can create a token with an address like:

How It Works

1. Choose your prefix - Up to 5 characters after 0x (e.g., BEEF, 420, CAFE)

2. Choose your suffix - Up to 5 characters at the end (e.g., DEAD, 6969, BABE)

3. We mine the salt - Your browser finds a CREATE2 salt that produces your desired address

4. Deploy - Your token launches with your custom vanity address

Why Vanity Addresses Matter

• Brand recognition - A memorable address builds trust

• Marketing appeal - 0xBEEF... is way cooler than random hex

• Meme potential - Perfect for meme coins (0x4206...)

• Professionalism - Shows attention to detail

Short patterns (2-3 chars) mine in seconds. Longer patterns (4-5 chars) take a few minutes - but the result is worth it.

What You Get

Every token deployed through BNB Token Creator includes:

Automatic BscScan verification - Your contract is verified and readable

Open source code - No hidden functions or backdoors

Built on OpenZeppelin - Industry-standard, audited base contracts

Ownership controls - Transfer or renounce ownership anytime

Listed on our Launchpad - Get discovered by other users

Pricing

$1 flat fee + gas

Gas on BSC is incredibly cheap. A typical deployment costs:

• Platform fee: $1.00

• Gas cost: ~$0.30-0.50

Total: ~$1.50

That's it. No hidden fees. No monthly subscriptions. No revenue sharing.

Step-by-Step Guide

1. Prepare Your Wallet

• Install MetaMask or any Web3 wallet

• Add BNB Smart Chain network

• Fund with at least 0.01 BNB (~$6)

2. Visit BNB Token Creator

Go to bnbtoken.ai and click "Create Token"

3. Choose Your Mode

• Simple - Quick and easy

• Safe - Trust-optimized

• Advanced - Full control

4. Configure Your Token

Enter your token details:

• Name (e.g., "My Awesome Token")

• Symbol (e.g., "MAT")

• Total Supply (e.g., "1000000000")

• Enable any optional features

5. Review and Deploy

• Preview your token configuration

• Confirm the transaction in your wallet

• Wait a few seconds for confirmation

6. You're Live!

Your token is now deployed on BSC. You'll receive:

• Contract address

• Link to BscScan

• Shareable token page

Real Tokens, Real Results

Browse tokens created by our community on the Launchpad. Every token you see was deployed using our platform.

Frequently Asked Questions

Q: Is my token safe? A: Yes. We use audited OpenZeppelin contracts as our base. Your token code is automatically verified on BscScan so anyone can review it.

Q: Can I add liquidity on PancakeSwap? A: Absolutely. Your token is a standard BEP-20 and works with all BSC DEXs.

Q: What if I make a mistake? A: Some settings can be changed after deployment (fees, limits, etc.). Others are permanent (name, symbol, initial supply). Review carefully before deploying.

Q: Do you take a percentage of my token? A: No. You receive 100% of your token supply. We only charge a flat $1 fee.

Q: Can I renounce ownership? A: Yes. You can renounce ownership at any time, making your token fully decentralized.

About EscapeHub

BNB Token Creator is powered by EscapeHub, a multi-chain token deployment platform supporting 20+ EVM networks including Ethereum, Arbitrum, Base, Polygon, Avalanche, and more.

Open Source SDK Coming This Week

We're releasing the EscapeHub SDK as open source this week. It's the same framework that powers this site - a complete toolkit for token deployment, vanity address mining, and on-chain token reading.

Whether you want to build your own token creator, integrate token deployment into your dApp, or just learn how it works under the hood - the SDK will be available on npm and GitHub.

Start Building Today

Ready to launch your token on BNB Smart Chain?

Create Your Token Now →

Join thousands of creators who've already launched on BSC with BNB Token Creator.

Links

• BNB Token Creator: bnbtoken.ai

• Token Launchpad: bnbtoken.ai/explore

• Powered By: escapehub.ai

• Twitter: @escape_hub

• Telegram: t.me/escapehub_official

Questions? Our team is active in Telegram - drop by and say hi!

Tags: #BNBChain #BSC #BEP20 #TokenCreation #Cryptocurrency #Web3 #DeFi #PancakeSwap #SmartContracts #Blockchain #NoCoding

When we started building EscapeHub, we studied dozens of presale projects that dumped after launch. The pattern was always the same: big promises, fast raise, token launch, immediate crash. We decided to do the opposite.

The Presale Problem Everyone Knows But Nobody Solves

Let’s be honest about what happens with most presale tokens:

1. Project raises funds during presale

2. Token launches on DEX

3. Early buyers dump immediately

4. Price crashes 80–90% within hours

5. Community loses trust

6. Project struggles to recover

This pattern repeats constantly. It’s not because presale buyers are bad actors: it’s because there’s nothing stopping them from selling. No utility. No reason to hold. Just speculation and exit liquidity.

The question we get asked most often:

“What is your preventive plan so that the price does not drop after launch? Many presales drop 80–90% after launch. What will happen when ESC hits the market?”

Fair question. Here’s our answer.

Why Most Presales Fail After Launch

Before explaining our strategy, let’s understand why the dump happens:

Problem 1: Launch Before Product Most projects launch their token while still “building.” The token has no real use case yet. Holders have nothing to do except sell.

Problem 2: No Demand Mechanism There’s no system that creates ongoing buying pressure. Supply hits the market, but there’s no matching demand.

Problem 3: Unlocks Without Utility When tokens unlock, there’s no incentive to hold them. Selling is the only rational action.

Problem 4: Speculation Over Substance The entire value is based on future promises. When reality doesn’t match the hype timeline, confidence collapses.

EscapeHub is solving all four problems simultaneously.

The 600K Hard Cap - Building Time, Not Just Capital

Our presale has a hard cap of 600,000 USD. We won’t launch before reaching it.

This isn’t just about fundraising. The hard cap gives us time to build.

Right now, the token creation tool is live on 28 chains (and growing daily). But that’s just the beginning. Before ESC launches, we’re building:

• Presale Launchpad — Create and manage token presales

• Vesting System — Automated token distribution schedules

• Telegram Bots — Trading and management tools

• Multi-Chain Launchpad — Cross-chain token launch infrastructure

Every one of these utilities will integrate ESC.

By the time the token launches, there won’t be one product hoping for adoption. There will be an ecosystem already running.

Buyback and Lock - Every Fee Creates Demand

Every token created on EscapeHub costs 1 USD + gas fees. That fee doesn’t just sit in a treasury wallet.

Platform fees are used to buy ESC from the market and lock it. This creates constant buying pressure from actual platform usage. The more people use our tools, the more ESC gets bought and locked.

launchpad, vesting system, and other tools will have similar mechanisms.

Why We’re Open-Sourcing Everything

We’re releasing our frontend frameworks as open source:

• React framework

• Vue framework

• Angular framework

Other platforms can take our code and build their own token creation tools. Sounds like we’re giving away value, right?

Here’s what they can’t change: the smart contracts.

The fee mechanism is embedded in the contracts themselves. Every token created through any implementation: whether on app.escapehub.ai or a third-party platform using our frameworks still triggers the ESC buy-and-lock.

More adoption = more ESC demand

Even our competitors using our open-source code contribute to the ecosystem.

One Token, Multiple Utilities

ESC isn’t a single-use token. We’re building multiple utilities — token creation, presale creator, token locking, Telegram bots, 1LP multi-chain launchpad, and more. Each one will integrate ESC in different ways:

• Fee mechanism — Platform fees used to buy ESC and lock it

• Discounted rates — Pay in ESC instead of ETH for lower prices

• Holder benefits — Extra features unlocked for ESC holders

Not every utility works the same way. Some will buy and lock ESC. Some will offer discounts for ESC payments. Some will give exclusive options to holders. The point is: every tool we build creates demand for ESC through actual usage, not speculation.

By launch, holding ESC will already provide tangible benefits across multiple live products.

Built-In Demand vs. “Hope” Demand

Most tokens rely on speculative demand: people buying because they think the price will go up.

ESC is designed around structural demand: people and systems buying because they need to.

When you use our platform, ESC gets involved — whether through automatic buy-and-lock mechanics, discounted fees for ESC payments, or extra features for holders. The demand comes from actual platform usage, not from people hoping the number goes up.

What This Means For Presale Buyers

If you’re considering the ESC presale, here’s what you’re actually buying into:

Not This:

• A token that launches and hopes for adoption

• Promises of future utility

• Speculation on roadmap execution

This:

• A token with embedded demand mechanisms

• Multiple live products before launch

• Structural buying pressure from day one

• Open-source adoption that feeds the ecosystem

The 90% dump happens when there’s nothing stopping it. We’re building the stops into the architecture itself.

Summary

Most presales dump because they launch with speculation and promises. EscapeHub is building differently:

• 600K hard cap — Time to build before launch

• 1 USD fee mechanism — Every token creation buys and locks ESC

• Open-source strategy — Third-party adoption still feeds ESC

• Multi-utility design — ESC integrated across all products

• Live products first — Ecosystem running before token launches

When ESC goes live, it won’t be entering an empty market hoping for buyers. It will be entering an ecosystem that’s already using it.

Tokens dump when there’s nothing stopping them. We’re building the stops into the architecture itself.

Join the Presale: escapehub.ai

Use the Platform: app.escapehub.ai

Follow Updates: @Escape_Hub on X

This article explains EscapeHub’s strategy for ESC tokenomics as of December 2025. Token mechanics are subject to smart contract implementation.

TL;DR: EscapeHub Token Creator is a no-code ERC-20 generator that lets you deploy tokens across Ethereum, Base, Arbitrum, BNB Chain, and 35+ blockchains for $1 + gas fees. No coding required. Choose from Simple, Community First, or Advanced modes with features like anti-whale protection, anti-bot deadblock, trading fees, and whitelist controls. The $ESC presale is now live.

What Is EscapeHub Token Creator?

EscapeHub Token Creator is a no code token generator platform for creating ERC-20 tokens on multiple blockchain networks. You can deploy tokens without coding knowledge or Solidity experience. This no-code solution makes token creation accessible to everyone. Whether you want to launch a meme token, a community token, or a serious DeFi project, you can configure everything from a web interface and deploy in under 5 minutes.

The platform is live on Ethereum, Base, Arbitrum, and BNB Chain (BSC), with approximately 2 new networks being added daily. EscapeHub is a true multi-chain token deployment solution supporting 35+ EVM-compatible blockchains.

How Much Does It Cost to Create a Token?

Creating a token on EscapeHub costs $1 flat fee plus network gas fees. The $1 fee is paid within the same deployment transaction.

You can also pay with $ESC tokens for discounts. A portion of fees goes toward buying back and locking $ESC tokens, supporting the ecosystem.

What Are the Three Creation Modes?

EscapeHub offers three distinct creation modes to match your project needs:

Simple Mode is designed for quick launches. It includes burn functionality, rescue functions for recovering stuck tokens, editable metadata and socials, and all supply goes to your wallet. This mode works well for meme tokens, tests, or projects that want flexibility.

Community First Mode maximizes holder protection. The owner cannot access funds through rescue functions, metadata and socials are locked forever, and the token is fully transparent and verifiable. This mode proves good intentions to your community and builds trust.

Advanced Mode gives you complete control over every parameter. You can add trading fees, anti-bot protection, holder limits, whitelist and blacklist controls, and more. Everything is optional and you enable only what you need.

What Token Settings Can You Configure?

Basic Settings

You can choose your token name, symbol, total supply, and decimal amount. Most tokens use 18 decimals, the same as ETH, but you can set anything from 0 to 18.

You can also generate a vanity contract address with a custom prefix or suffix, making your token address recognizable and memorable.

Supply and Distribution Options

Fixed vs. Mintable Supply: Choose a fixed supply where no new tokens can ever be created, or enable minting with an optional hard cap that limits maximum supply.

Initial Distribution: Send all tokens to your wallet, or automatically split them across multiple wallets with custom percentages at deployment.

Burn Function: Allow any holder to permanently destroy their own tokens, reducing total supply. This creates deflationary tokenomics.

Ownership and Control

Owner Address: Deploy to your connected wallet or specify a custom owner address.

Permission Levels: Full owner permissions, limited permissions, or no owner privileges at all.

Renounce Ownership: Permanently give up owner access after deployment, making the token immutable.

What Anti-Bot and Anti-Snipe Features Are Available?

Deadblock Protection

Block all trades in the first 1-10 blocks after trading is enabled. This prevents bot sniping at launch when bots try to buy immediately as trading opens. You can configure deadblock to affect buys only, sells only, or both.

Trading Cooldown

Require each wallet to wait a specified number of seconds between trades. This basic protection prevents rapid-fire trading by bots and helps human traders compete fairly.

Whitelist Module

Control who can trade before trading is publicly enabled. Only whitelisted addresses can interact with the token, letting you set up liquidity and complete private sales before public launch.

Router Protection

Block all DEX router interactions until you manually enable trading. This prevents anyone from creating liquidity pools before you're ready.

What Anti-Whale Features Are Available?

Max Wallet Limit

Limit how much any single wallet can hold. You can set this as a percentage of total supply or an absolute amount. Optional time windows let limits expire automatically after a set period.

Max Transaction Size

Limit the maximum amount that can be transferred in a single transaction. This prevents large sudden buys or sells that could destabilize the price.

Anti-Dump Module

Limit how much any wallet can sell within a specified time period. You can set limits as an absolute amount or as a percentage of the holder's balance. This prevents large holders from dumping their entire position at once.

The anti-dump module includes flash loan protection that uses balance snapshots to prevent attackers from temporarily inflating their balance to bypass sell limits.

Can You Add Trading Fees to Your Token?

Yes. The fees module lets you configure separate fees for buys, sells, and wallet-to-wallet transfers.

Fee Options Include:

• Buy fee percentage (up to 20%)

• Sell fee percentage (up to 20%)

• Transfer fee percentage (up to 20%)

• Fee recipient address (owner wallet or custom address)

• Fee-exempt addresses (whitelist specific wallets)

• Automatic fee burning (burn a portion of collected fees)

You can choose between fixed fees that are permanent from deployment or flexible fees that you can adjust later within immutable maximum caps. The flexible option lets you start with higher launch fees and reduce them over time.

What Security Features Are Built In?

Blacklist Module

Block specific wallet addresses from sending or receiving tokens. You can add addresses to the blacklist after deployment, and optionally freeze the blacklist permanently so no new addresses can ever be added.

Pause Function

Temporarily freeze all token transfers. This emergency function can be useful for migrations or security incidents, but some investors view it as a risk since trading can be stopped at any time.

Rescue Function

Recover ERC-20 tokens or ETH accidentally sent to your token contract. If disabled, those funds are permanently lost. Community First mode disables this by default for maximum holder protection.

EIP-2612 Permit

Gasless approvals via cryptographic signatures. This is always enabled and lets users approve token spending without paying gas, improving user experience for DeFi integrations.

Can You Edit Your Token After Deployment?

Editable Elements (if configured):

• Token name and symbol (can be locked permanently)

• Social links: website, Telegram, X handle, Discord (can be locked permanently)

• Fee amounts (within immutable maximum caps)

• Wallet and transaction limits

• Cooldown settings

• Blacklist and whitelist addresses

One-Way Actions (cannot be undone):

• Lock metadata (name and symbol become permanent)

• Lock social links

• Freeze blacklist

• Freeze whitelist

• Renounce ownership

• Enable trading (cannot be disabled once enabled)

How Do You Create a Token Step by Step?

Step 1: Visit app.escapehub.ai and connect your wallet.

Step 2: Select your blockchain network. Ethereum, Base, Arbitrum, and BSC are currently live. (Including their testnets)

Step 3: Choose your creation mode: Simple for quick launches, Community First for maximum trust, or Advanced for full customization.

Step 4: Configure your token basics including name, symbol, supply, and decimals.

Step 5: Set up supply distribution if you want to split tokens across multiple wallets.

Step 6: Enable optional features like fees, limits, anti-bot protection, or access controls.

Step 7: Add your social links and optionally upload a logo and banner.

Step 8: Generate a vanity address if desired.

Step 9: Review all settings and deploy.

Step 10: Confirm the transaction in your wallet. The $1 fee and deployment happen in one transaction.

Your token is deployed and verified automatically. You can immediately start adding liquidity or distributing tokens.

What Networks Are Supported?

EscapeHub supports multi-chain token deployment across all major EVM networks. Deploy your token to any supported blockchain from a single interface.

Currently Live:

• Ethereum Mainnet

• Base

• Arbitrum One

• BNB Smart Chain (BSC)

Coming Soon (30+ total networks):

• Polygon

• Avalanche C-Chain

• Optimism

• Fantom

• Cronos

• And many more

Approximately 2 networks are being added daily until full coverage is reached. This makes EscapeHub the most comprehensive multi-chain ERC-20 token generator available.

What Is the $ESC Token Presale?

The $ESC presale is now live. $ESC is the native token of the EscapeHub ecosystem with real utility:

Pay with $ESC for Discounts: Use $ESC to pay token creation fees at reduced rates.

Buyback and Lock: A portion of platform fees goes toward buying $ESC from the market and locking it, reducing circulating supply over time.

Fair Value Purchases: The protocol purchases $ESC at fair market value, supporting healthy price discovery.

Join the presale at escapehub.ai to get $ESC before the public launch.

Frequently Asked Questions

How long does token deployment take?

Deployment typically takes 30 seconds to 2 minutes depending on network congestion. Your token is verified automatically.

Can I deploy the same token to multiple chains?

Each deployment creates a separate token on one chain.

What wallets work with EscapeHub?

Any WalletConnect-compatible wallet works, including MetaMask, Coinbase Wallet, Trust Wallet, and Rainbow.

Is the smart contract audited?

The LaunchERC20 contract has undergone comprehensive security review. The contract operates near maximum EVM bytecode size limits with extensive security features including reentrancy guards and flash loan protection.

Can I create tokens on testnets first?

Yes, testnet support is available for testing your configuration before deploying to mainnet.

What happens if I send the wrong tokens to my contract?

If you enabled the rescue function, the owner can recover stuck ERC-20 tokens and ETH. If rescue is disabled (Community First mode default), those funds are permanently lost.

Can trading be re-enabled after being paused?

Yes, if pause is enabled, the owner can pause and unpause transfers. However, once trading is enabled via the trading switch, it cannot be disabled.

How do I add liquidity after deployment?

Go to your preferred DEX (Uniswap, PancakeSwap, etc.), connect the same wallet, and create a liquidity pair with your new token. If you enabled router protection, make sure trading is enabled first.

Summary

EscapeHub Token Creator offers the most comprehensive no-code token deployment solution available in 2025. With three creation modes, extensive anti-bot and anti-whale protection, flexible fee systems, and support for 40+ blockchain networks, you can launch exactly the token your project needs.

Key benefits include $1 flat fee pricing, no coding required, automatic contract verification, and professional-grade security features that previously required expensive custom development.

Get Started: app.escapehub.ai

Join the $ESC Presale: escapehub.ai

Follow Updates: @Escape_Hub on X

This guide covers EscapeHub Token Creator as of December 2025. Features and supported networks are actively expanding.

What Is EscapeHub Token Creator?

EscapeHub is a no-code token creation platform that allows anyone to deploy ERC-20 tokens across multiple blockchain networks. Instead of writing Solidity code or hiring developers, users can create fully functional tokens through a simple web interface at app.escapehub.ai.

Key features include:

• Multi-chain deployment (35+ networks supported)

• No programming knowledge required

• Token contract editing (coming this week)

• $1 flat fee per token creation

• Open-source frontend frameworks (React, Vue, Angular)

Which Blockchains Does EscapeHub Support?

EscapeHub supports token creation on 35+ blockchain networks. Here’s the complete list of supported chains:

Mainnet Networks

Layer 1 Networks

• Ethereum

• BNB Smart Chain

• Avalanche

• Celo

• Sonic

• Monad

• Sei Network

• Gnosis

• XDC Network

Layer 2 Networks

• Polygon

• Arbitrum One

• Arbitrum Nova

• Optimism (OP)

• Base

• zkSync Era

• Linea

• Blast

• Scroll

• Mantle

• Taiko

• Swellchain

• Metis

• Pepe Unchained

Parachains

• Moonbeam

Testnet Networks

• Sepolia (Ethereum testnet) Live

• Hoodi Testnet

• BNB Smart Chain Testnet

• Polygon Amoy

• Arbitrum Sepolia

• Optimism Sepolia

• Base Sepolia

• Avalanche Fuji

• Blast Sepolia

• Celo Sepolia

• Mantle Sepolia

• Scroll Sepolia

• zkSync Sepolia

• Apothem (XDC testnet)

• Monad Testnet

• Gnosis Chiado

Important: Networks are rolling out gradually, not all at once. Follow @Escape_Hub on X for release announcements.

How Much Does It Cost to Create a Token on EscapeHub?

Token creation costs $1 per deployment + network gas fees.

The $1 is EscapeHub’s platform fee and applies regardless of which blockchain you choose. Gas fees vary depending on the network and current network congestion.

What you get for $1:

• Token deployment on your chosen network

• Automatic smart contract verification

• Access to token contract editing (coming this week)

• Full ownership of your token

Pro tip: Layer 2 networks like Base, Arbitrum and Optimism have significantly lower gas fees than Ethereum mainnet-often under $0.10.

$ESC Token Holder Benefits: The $ESC token will be the driving force behind the entire EscapeHub ecosystem. All current and future platform utilities- including token creation, editing and upcoming services - will integrate with $ESC to provide value to holders.

Will You Be Able to Edit Token Contracts After Creation?

This feature is being implemented this week .It depends on your choices during deployment.

EscapeHub gives you full control over what can and cannot be changed after your token is created. At deployment, you decide:

Mutable vs Immutable Options:

• Token name & symbol -Start editable (can lock later) OR lock permanently from day one

• Socials (website, Telegram, X, Discord) - Keep editable OR lock from deployment

• Blacklist - Keep manageable OR freeze forever

• Whitelist - Keep manageable OR freeze forever

One-Way Locks: Once you lock metadata, freeze the blacklist, or renounce ownership - it’s permanent. These actions cannot be undone, giving your token holders certainty about what can never change.

Module Controls: Enable or disable features like minting, pausing, fees, limits, cooldowns and more. Disabled modules cannot be activated later - this is by design for security.

Note: Editing capabilities depend on your initial token configuration. Some parameters are immutable by design for security.

Is EscapeHub Open Source?

Partially yes. Starting Week 51 (December 2025), EscapeHub will release its frontend code as open source for three major frameworks:

1. React

2. Vue

3. Angular

What this means for developers:

• Integrate token creation into your own website

• Build custom platforms for specific blockchain networks

• White-label the token creation tool

The smart contracts themselves power the token creation and developers can leverage them through the open-source frontend frameworks.

How to Create a Token on EscapeHub (Step-by-Step)

Creating your own token takes less than 5 minutes:

Step 1: Visit app.escapehub.ai

Step 2: Connect your Web3 wallet (MetaMask, WalletConnect, etc.)

Step 3: Choose your Launch Mode:

• Simple - Basic token with owner utilities. Good for memes, tests, or flexibility.

• Community First - Maximum holder protection. No owner privileges that could hurt investors. Best for serious projects.

• Advanced - Configure every parameter: trading fees, anti-bot protection, limits and more.

Step 4: Select your target blockchain network

Step 5: Fill in your token details based on your chosen mode

Step 6: Confirm the transaction in your wallet (includes $1 platform fee + gas)

Step 7: Your token is deployed and verified automatically

EscapeHub Presale: Current Status

sale for the $ESC token has raised over $385,000 to date.

Why the $ESC token matters:

Every tool EscapeHub builds will integrate with the $ESC token to benefit holders:

• Pay with $ESC - Get discounts on platform services when paying with $ESC

• Buyback & Lock - Tokens are bought back and locked to support value

• Fair Value Purchases - Team commits to buying tokens at fair price when unlocked

The $1 token creation fee currently supports the presale. After presale completion, fees integrate into the broader EscapeHub ecosystem.

Join the presale: EscapeHub.ai

Frequently Asked Questions

Do I need coding skills to create a token?

No. EscapeHub is a no-code platform. You fill out a form, pay $1 and your token deploys automatically.

How long does token creation take?

Under 5 minutes, including blockchain confirmation time.

Which wallet do I need?

Any Web3 wallet works - MetaMask, WalletConnect, Coinbase Wallet, Trust Wallet, etc.

Can I create tokens on testnet for free?

Testnet deployments still require the platform fee, but you only pay testnet gas (which is free).

Are the smart contracts audited?

The platform completed extensive verification.

When will all 35+ networks be available?

Networks roll out gradually throughout December 2025. Around 2 networks daily will be added to the available list. Follow announcements on X.

Can I use EscapeHub for my own platform?

Yes. The open-source frontend frameworks (React, Vue, Angular) release in Week 51, allowing full integration!

What’s Next for EscapeHub?

This week: Multi-chain rollout begins with initial networks

Week 51 (2025): Open-source frontend release (React, Vue, Angular)

Ongoing: Additional network integrations, feature updates and ecosystem expansion

Summary

EscapeHub provides the easiest way to create ERC-20 tokens across 35+ blockchain networks without writing code. At $1 per token, it’s accessible to everyone from individual creators to enterprises building token ecosystems.

Key takeaways:

• 35+ supported networks (mainnets + testnets)

• $1 flat fee per deployment

• No coding required

• Token editing after creation (Coming this week)

• Open-source frameworks coming Week 51

• $385k+ raised in presale

Get started: app.escapehub.ai

Join presale: EscapeHub.ai

Follow updates: @Escape_Hub on X

About EscapeHub: EscapeHub is a blockchain development platform focused on making web3 tools accessible to everyone. The platform launched in 2025 with the mission to democratize access to Web3 token infrastructure.