A coriander seed offer may state 99% purity or 99% clean material, but the remaining one percent can contain very different things. One supplier may count split fruits as acceptable coriander, another may place them with broken material, and a third may report foreign seeds, plant fragments, soil and damaged fruits under separate headings. The headline percentage is not enough to compare the offers.
For spice processors, food manufacturers and packers, a useful purchase specification defines what belongs in the product, what is tolerated as a coriander fraction, what is foreign material and which defects are reported separately.
Start with the contracted product form
Cleanliness cannot be interpreted before the product form is clear. Whole, screened whole, split, cracked and ground coriander are separate commercial forms. A split fruit may be a defect in a whole-seed order but part of the intended product in a split-seed order.
Zenith Eclipse’s coriander seed supply overview separates product identity, form, sensory condition, physical cleanliness and testing. The enquiry should state the intended food, milling, packing or distillation use, because the buyer’s process determines which fractions create a problem.
Write the item description first: for example, whole dried coriander fruits, screened to an agreed profile, with defined tolerances for split, broken and fine material. Avoid using “coriander seed” as the complete description.
Define every part of the sample
A practical defect schedule gives each observed fraction one home. If the same piece can be counted in two categories, inspectors may produce different totals from the same sample. Definitions should describe the physical condition rather than rely only on labels such as impurity or off-grade.
Depending on the contracted form, the schedule may distinguish:
-
sound coriander fruits of the intended form;
-
whole fruits, half fruits, broken pieces and fines;
-
other seeds or plant material not belonging to the product;
-
mineral or non-plant foreign material;
-
damaged, discoloured, shrivelled or immature fruits;
-
material showing mould or insect-related damage;
-
live infestation or other rejection conditions handled separately.
Do not force food-safety results into the physical purity percentage. Microbiological, residue and contaminant requirements need their own agreed tests, limits and lot evidence. A visually clean sample does not close those reviews.
State the denominator and calculation
The contract should identify whether percentages are measured by mass, count or another agreed basis, and whether the calculation uses the original sample or a prepared portion. Record sample size, preparation, sorting sequence and rounding rule. A result rounded to one decimal place should not be treated as more precise than the underlying procedure supports.
Keep component results visible even if a total purity figure is also reported. A buyer may accept a small proportion of sound split coriander but reject the same quantity of stones or unrelated seeds. One combined remainder hides that difference.
Connect screening to the cleanliness claim
Screening changes the distribution of whole fruits, broken pieces and fines, but the word screened does not define a result by itself. The screened coriander product scope should be translated into an agreed sieve sequence, sample procedure and size distribution for the offered lot.
A sieve result and a manual purity sort answer different questions. The sieve shows how much material falls within specified size bands. The visual sort identifies what the material actually is and its condition. Use both where the purchase decision depends on size and cleanliness.
Compare offers on the same schedule
Create one table and ask every supplier to populate it. Preserve the supplier’s original terminology, then map it to the buyer’s definitions only after any ambiguity is resolved. Mark fields as measured, contractual maximum, typical, pending or not tested.
Consider two offers both described as 99% clean. Offer A allows up to 0.8% sound split fruits within the accepted product and reports foreign matter separately. Offer B includes all broken material, foreign seeds and plant fragments in a single one-percent remainder. The numbers look identical, but they do not describe the same physical composition.
Before selecting either offer, request the underlying fractions, inspection method and a representative lot sample where agreed. If conversion to a common schedule is not possible, record the offers as not directly comparable rather than inventing a ranking.
Link the sample, certificate and loaded lot
The approved quality schedule should identify the sampling point and lot reference. A pre-shipment sample, mill sample and sample drawn during loading may not represent the same stage. State whether acceptance depends on a certificate, independent inspection, retained sample or another agreed record.
Use a buyer-ready cleanliness checklist
-
Botanical identity and commercial form are stated.
-
Whole, split, broken and fine fractions are defined.
-
Foreign plant and mineral matter are separated.
-
Damaged, mould-affected and insect-related defects have agreed categories.
-
The measurement basis, sample size and method are recorded.
-
Sieve distribution and physical purity are not treated as the same test.
-
Food-safety tests remain separate from visual cleanliness.
-
The certificate and sample are linked to the offered or loaded lot.
Turn the percentage into an acceptance rule
A useful coriander specification explains the composition behind the headline number. It gives suppliers a consistent quotation basis, inspectors a repeatable sorting method and buyers a defensible lot decision.
For a coriander enquiry, send the required form, intended use, cleanliness definitions, particle profile, testing, quantity, packing, destination and shipment period to sales@zenitheclipse.com. Zenith Eclipse Co can align the product brief with the quotation and lot documents.