A pea lot can be yellow or green, whole or split, and still require a different commercial and quality file depending on whether it is intended for food or animal feed. A certificate prepared for one use stream should not automatically be treated as evidence for the other.
The buyer should define intended use at the enquiry stage, then connect the specification, sampling, documents, storage identity and release decision to that use. This avoids a broad description such as “dry peas” being asked to support two different supply chains.
Declare intended use before comparing offers
Zenith Eclipse’s dry peas supply page treats yellow and green peas, whole and split forms, and food and feed requirements as separate commercial scopes. The written offer identifies the colour class, physical form, intended use, grade or private specification, quality limits, packing, inspection and destination documents.
An RFQ should therefore state food processing, retail packing, milling, feed formulation or another approved application. The supplier needs that information before selecting a lot, test plan and document set. A lower-price offer for a different use stream is not a comparable alternative unless the buyer’s responsible team approves the full requirement.
Build a specification for the actual use
Food-use peas may require controls for presentation, processing performance and destination food requirements in addition to physical quality. Feed peas need a dedicated physical, safety and nutritional specification suitable for the intended formulation and market. Neither schedule should be copied into the other without technical review.
A complete specification may include:
-
yellow or green colour class and whole or split presentation;
-
named grade or buyer-defined quality basis;
-
moisture, foreign material, stones, damage, infestation and odour limits;
-
whole-pea splits or split-pea integrity, broken pieces, fines and residual hull;
-
food-use safety, processing or presentation requirements where applicable;
-
feed-use nutritional and safety parameters selected by the responsible feed team;
-
sampling point, methods, units, inspection party and acceptance result;
-
packaging, lot marking, storage and transport compatibility; and
-
destination permits, certificates and other required records.
Keep test methods and reporting units beside every result. The same parameter name can be misleading if the sample preparation, analytical basis or method differs.
Make the certificate identify its scope
A certificate should identify the product, intended use, lot, sampling basis, results, methods or references where agreed, issuer, issue date and relevant contract or shipment reference. It should be clear whether the document reports a lot-specific result, a supplier declaration or typical information.
Do not assume that a certificate titled “peas analysis” covers food requirements, feed composition and destination compliance together. Ask which decisions the document is intended to support and which records remain separate. Where independent inspection is contracted, the instruction should name the use stream and the exact specification being tested.
Keep food and feed lots traceable
Warehouses handling both streams should preserve product identity through receipt, storage, processing, packing and dispatch. Use distinct item descriptions, lot codes, locations or segregation controls appropriate to the operation. The records should show which bags or bulk quantity were released for which destination and use.
A bag marked only “yellow peas” is not enough if the same site handles food-use whole yellow peas, split product and feed peas. Include the agreed form, use and lot reference on the controlled records and labels required by the contract.
Do not turn a food rejection into an automatic feed release
A lot that fails a food buyer’s appearance preference does not automatically become suitable for feed. The reason for the food decision may be irrelevant to feed, or it may involve a condition that also requires review. The feed buyer’s responsible technical and quality parties must assess the lot against the approved feed specification and destination requirements.
Likewise, feed analytical results do not establish suitability for retail food packing. A change of use needs a documented decision, appropriate tests and correct product identity. Commercial pressure should not replace that review.
Test the controls with one mixed-site scenario
Consider a hypothetical warehouse receiving whole yellow peas for food packing and another lot for feed. Both arrive in similar bags. The food lot has a specification and lot certificate; the feed lot has a separate analysis. If the intake system records only “yellow peas,” later allocation can lose the distinction.
The corrective control is simple: create separate item and lot records before unloading, verify bag marks and documents, and assign each receipt to its approved storage and release process. If a bag or document does not match, hold the affected quantity under an identified status until the responsible party resolves it.
Align the final shipment documents
Before loading, reconcile the invoice, packing list, certificate, origin and any destination-specific records with the actual use, form, lot and quantity. Keep food and feed consignments separately identifiable even when they share a broader shipment programme.
For a useful pea enquiry, provide the colour, whole or split form, food or feed use, complete specification, quantity, packaging, destination, shipment window, sampling plan and required documents. Product enquiries can be sent to sales@zenitheclipse.com.
Food-use and feed peas may begin with the same crop, but they should not travel under one vague specification. Clear use-stream separation gives procurement comparable offers and gives quality, warehouse and document teams a defensible release basis.