Start typing to search this publication.
Zenith Eclipse Co logo Zenith Eclipse Co
Open menu
Zenith Eclipse Co logo

Subscribe to Zenith Eclipse Co

Get new posts delivered straight to your inbox.

Can Two 48% Soybean Meal Results Mean Different Things?

Zenith Eclipse Co avatar Zenith Eclipse Co
3 min read

Zenith Eclipse Co.

Two soybean meal certificates both report 48% crude protein. The figures appear identical, yet one may be stated on an as-received basis while the other is calculated on dry matter. The lots may also differ in moisture, fibre, residual oil, hull status, extraction route or analytical method.

A protein percentage becomes commercially comparable only after the buyer confirms what material was tested, which basis was used and which other composition fields define the product. The headline number is not the complete soybean meal specification.

Start with the actual soybean meal identity

The Zenith Eclipse soybean meal page separates solvent-extracted and mechanically pressed material, dehulled and hull-retaining meal, and meal from full-fat soy. These are not interchangeable products.

Before comparing certificates, record the extraction process, hull status, heat-treatment description and physical form. A result for dehulled extracted meal should not be moved into an item record for hull-retaining meal or expeller merely because the protein percentage is familiar.

State whether the supplied form is loose meal, pellets, ground expeller, cake or chips. Compaction or grinding does not change the need to identify the underlying ingredient and final delivered analysis.

Put protein on one moisture basis

An as-received result includes the water in the sample. A dry-matter result removes that water from the denominator. The certificate should state the basis rather than leaving the buyer to infer it from a grade name.

For a simplified hypothetical calculation, a meal reported at 48% protein on a dry-matter basis and 12% moisture corresponds to 42.24% protein as received: 48 multiplied by 0.88. Conversely, a 48% as-received result at 12% moisture corresponds to about 54.55% on a dry-matter basis: 48 divided by 0.88.

Those examples only demonstrate the conversion. They are not Zenith Eclipse grades or lot specifications. The contract should state which basis controls acceptance, the moisture method used and how rounding is handled.

Do not convert a value if the sample moisture is unknown, comes from a different lot or was measured at a different preparation stage. The arithmetic cannot correct a sampling mismatch.

Read protein beside fibre and residual oil

A feed mill does not formulate on crude protein alone. Hull status can affect fibre, while extraction route can affect residual oil and energy contribution. Ash, moisture and other agreed composition fields may also be relevant.

The Zenith Eclipse feed-meal selection guide recommends comparing processing identity, protein basis, fibre, moisture, residual oil and form before asking a qualified formulator to evaluate the offered material.

A higher protein result should not be used to conceal an unsuitable fibre maximum, unclear residual-oil basis or different process identity. Likewise, a similar protein and fibre pair does not automatically prove equivalent amino-acid contribution, heat-treatment condition or feed performance.

The buyer’s nutritionist or qualified technical reviewer remains responsible for approving the ingredient within the intended species, life stage and complete formula.

Confirm the method behind crude protein

Crude protein is derived from a nitrogen determination using a conversion factor. The contract and certificate should identify the agreed analytical method and any required factor or reporting convention. Results from different methods should not be treated as identical without technical review.

Keep protein measurement separate from heat-processing indicators. Urease activity, trypsin-inhibitor activity and protein-condition tests answer different questions. No single result should be presented as universal proof of correct processing.

Where processing evidence is required, state the exact test, method, unit and acceptance range before the result arrives. A general phrase such as properly toasted is not an analytical instruction.

Trace the result to the lot and sample

The certificate should connect the purchase order, lot, sample, quantity represented and date of sampling. Define who sampled, where the sample was taken, how increments were combined and whether sealed or retained portions are available.

If the supplier provides a typical analysis, label it as reference information. It should not be presented as the current shipment result. When several lots are loaded, decide whether each needs a separate report or whether an agreed representative composite is appropriate.

Use one comparison sheet

  • Product identity, extraction route, hull status and physical form.

  • Protein minimum with method, moisture basis and rounding rule.

  • Moisture, fibre, residual oil and ash where required.

  • Heat-treatment indicators with exact methods and units.

  • Lot, sample, quantity represented and sampling point.

  • Feed-safety and destination requirements.

  • Retest, retained-sample and dispute procedure.

  • Qualified technical approval for the intended formula.

Make the 48% label auditable

Two 48% results can describe different products or the same product on different bases. A defensible purchase decision aligns identity, moisture basis, method, companion composition values and lot evidence before comparing price or approving release.

For a soybean meal enquiry, send the process, hull status, form, analytical basis, quantity, packing, destination and delivery requirements to sales@zenitheclipse.com.

Subscribe to Zenith Eclipse Co

Commodity sourcing and global logistics insights from Zenith Eclipse Co, Dubai. Practical guidance on agricultural commodities, global sourcing, procurement, freight and supply chains. Explore zenitheclipse.com | info@zenitheclipse.com.