GLCstakedSUI Network - complete guide to run a Node & Validator
SUI is a layer 1 blockchain designed by Mysten Labs from the ground up in smart contract specific language called MOVE This guide will go over installing a Full Node and Validator from scratch in order to run a Sui network node, assumes a fresh install of Ubuntu 20.04LTS. Hardware Requirements: Node Requirements: Full node requirements are lower, but storage can be expected to increase over time CPUs: 2 RAM: 8GB Storage: 50GB Validator Requirements: Validators perform work and deal with chain...
GLCstakedEasy Guide to Gnosischain Validator - with Lighthouse
This guide is help you set up a Gnosischain Validator, this will cover the full set up on a local device installed with Ubuntu 20.04 LTS. We will be using Lighthouse for consensus layer client and Nethermind for our Execution layer client. Gnosischain merge is on the horizon, this guide is intended to be merge ready the set up will cover steps and configuration needed to run post merge, and today. Gnosischain is using Ethereum Proof of Stake consensus with the Beacon chain to select validator...
GLCstakedAztec Sequencer- Public Testnet
This is a full guide to setup an Aztec Sequencer on Public Testnet, using Docker Compose and your own Sepolia Ethereum node (same device)Aztec Network- A privacy first Layer 2 on EthereumAztec is a zk-rollup allowing developers to build decentralised applications that preserve user privacy without compromising security or decentralisation. Aztec team co-developed Plonk, a highly efficient and universal zk-SNARK proving system that has since become foundational across the ZK ecosystem. Plonk’s...
$ETH Solo Staker #stakefromhome
GLCstakedSUI Network - complete guide to run a Node & Validator
SUI is a layer 1 blockchain designed by Mysten Labs from the ground up in smart contract specific language called MOVE This guide will go over installing a Full Node and Validator from scratch in order to run a Sui network node, assumes a fresh install of Ubuntu 20.04LTS. Hardware Requirements: Node Requirements: Full node requirements are lower, but storage can be expected to increase over time CPUs: 2 RAM: 8GB Storage: 50GB Validator Requirements: Validators perform work and deal with chain...
GLCstakedEasy Guide to Gnosischain Validator - with Lighthouse
This guide is help you set up a Gnosischain Validator, this will cover the full set up on a local device installed with Ubuntu 20.04 LTS. We will be using Lighthouse for consensus layer client and Nethermind for our Execution layer client. Gnosischain merge is on the horizon, this guide is intended to be merge ready the set up will cover steps and configuration needed to run post merge, and today. Gnosischain is using Ethereum Proof of Stake consensus with the Beacon chain to select validator...
GLCstakedAztec Sequencer- Public Testnet
This is a full guide to setup an Aztec Sequencer on Public Testnet, using Docker Compose and your own Sepolia Ethereum node (same device)Aztec Network- A privacy first Layer 2 on EthereumAztec is a zk-rollup allowing developers to build decentralised applications that preserve user privacy without compromising security or decentralisation. Aztec team co-developed Plonk, a highly efficient and universal zk-SNARK proving system that has since become foundational across the ZK ecosystem. Plonk’s...
Share Dialog
Share Dialog
$ETH Solo Staker #stakefromhome
Subscribe to GLCstaked
Subscribe to GLCstaked
Celestia provides an efficient solution to the data availability problem by only requiring resource-limited light nodes to sample a small number of random chunks from each block to verify data availability.
Interestingly, the more light nodes that participate in sampling, the more data that the network can safely handle. This enables the block size to increase without equally increasing the cost to verify the chain.
Light nodes are part of celestia-node stack that handle data availability (as opposed to consensus - celestia-app). Because of the low resource requirements its possible to run this on lower spec devices that do not require constant connection to the internet (or high speed).
This doc I am covering steps taken in order to get celestia-node installed on a variety of devices different from standard VPS build, this was during the `blockspacerace testnet.
Arch Linux is a lightweight and flexible Linux distribution that tries to Keep It Simple. It has a rolling release model, meaning you can keep your system updated with the latest software without needing to reinstall.
There are mobile phone images available for Android and IOS phones
Celestia provides an efficient solution to the data availability problem by only requiring resource-limited light nodes to sample a small number of random chunks from each block to verify data availability.
Interestingly, the more light nodes that participate in sampling, the more data that the network can safely handle. This enables the block size to increase without equally increasing the cost to verify the chain.
Light nodes are part of celestia-node stack that handle data availability (as opposed to consensus - celestia-app). Because of the low resource requirements its possible to run this on lower spec devices that do not require constant connection to the internet (or high speed).
This doc I am covering steps taken in order to get celestia-node installed on a variety of devices different from standard VPS build, this was during the `blockspacerace testnet.
Arch Linux is a lightweight and flexible Linux distribution that tries to Keep It Simple. It has a rolling release model, meaning you can keep your system updated with the latest software without needing to reinstall.
There are mobile phone images available for Android and IOS phones
Device- Steam Deck
Deck comes installed with SteamOS which is based on Arch Linux, its a quite powerful handheld/portable gaming console, Arch Linux is growing in popularity among gaming with Linux.
This was tested with a full storage node, though it makes much more sense for a light client, as something that is not intended to be run 24/7, however I wanted to make use of the specs (500GB NVMe) and test out if it could run it.
Light client is part of celestia-node to run instead simply switch full > light where referenced in commands
this distribution does not come with ‘apt repository’ for installing packages, instead pacman as the default package manager, Its highly recommended to use one package manager as mixing can lead to conflicts and broken dependencies.
For Steam Deck only : Unlocking the Steam Deck:
SYSTEM SETTINGS and select Enable Developer mode, then press A to toggle it on. This will expose a new Settings menu called "Developer" which contains settings specific to game developers and people who are interested in modding the Steam Deck.
On Desktop mode the konsole should be visible, this is the terminal for SteamOS
Add a Password: sudo commands will ask for a password, even if none is set enter passwd and set new password
Default user is deck
Disable Read Only Mode:
sudo steamos-readonly disable
echo "keyserver hkps://keyserver.ubuntu.com" | sudo tee -a /etc/pacman.d/gnupg/gpg.conf
sudo pacman-key --init
sudo pacman-key --populate
sudo pacman-key --refresh-keys
Notes: refresh keys will take a while to complete, as it is trying to refresh all the keys in the keyring.
Might get a warning like: gpg: WARNING: running with faked system time: 2023-01-01 00:00:00 it's likely that the warning is related to the Steam Deck's setup, and it shouldn’t have any significant impact on system's functionality.
Add ssh - optional
sudo pacman -S openssh
sudo systemctl enable sshd
sudo systemctl start sshd
# to change port
sudo nano /etc/ssh/sshd_config #change port 22
sudo systemctl restart sshd
Install and Enable ufw - optional
sudo pacman -S ufw
sudo systemctl enable ufw
sudo systemctl start ufw
sudo ufw allow <port>
Install Dependencies
sudo pacman -Syu curl tar wget clang pkgconf openssl jq base-devel git make ncdu
NOTES: Differences from Ubuntu/Debian- libssl-dev is replaced with openssl, and pkg-config is replaced with pkgconf. Also, build-essential is replaced by base-devel.
Installing go
SteamDeck: .bashrc exists and seems to be used as default variable store, and comes with Go v0.19 installed and in the /usr/bin/ directory, as this is likely a dependency for other related packages to not break things its best to leave this.
Celestia node requires v1.20, and we can install this binary in a separate location to be used for Celestia only.
ver=1.20.2
wget <AMD URL HERE>
sudo tar -C /usr/local -xzf “go$ver.linux-amd64.tar.gz”
Add go to PATH
here can see that normally v1.19 is used, but with go added to the PATH we can source .bash_profile for celestia applications and use this version only.
Install celestia-node
Same as the Normal Install, however may have issues with make on this OS
cd $HOME
rm -rf celestia-node
git clone https://github.com/celestiaorg/celestia-node.git
cd celestia-node/
git checkout tags/v0.9.4 #check version for which network
make build
sudo make install
make cel-key
Problems with make - Additional Packages
there are additional packages, needed that may not come as standard on SteamOS (Arch Linux) or need to be reinstalled to `make build`
sudo pacman -Sy isl
sudo pacman -Sy libmpc
sudo pacman -Sy gcc-libs glibc
sudo pacman -Sy linux-api-headers
sudo pacman -Sy make
The warnings shown are because `pacman` could not find the expected files on your system before reinstalling the package. So long as we get to ‘make build’ with the expected output (shown above) everything is in order and packages should be installed correctly.
Initialize celestia node type
celestia full init --p2p.network blockspacerace
for light client use light this test was on blockspacerace network, this should be changed to desired network
Run the Node
setup a system service to run the node, from this example:
Node Started and syncing
Viewing logs directly on device, from brief testing all normal functions on the deck appear to work normally.
Mobian is an open-source project aimed at bringing Debian GNU/Linux to mobile devices, such as smartphones and tablets. The project's goal is to provide a Debian-based fully-featured desktop environment that is optimized for touch input while using the mainline Linux kernel.
Mobian, primarily supporting PinePhone and Librem 5, is a developing Linux-based mobile OS. Though not as polished or feature-rich as mainstream OS like Android or iOS, it's actively updated and improving (see releases).
The process should be similar for any compatible OS and device. I am using PinePhone an Open Source phone supporting existing Linux-on-phone projects. This has only 3GB RAM and an internal flash memory of 32GB eMMC, CPU: 64-bit Quad-core 1.2 GHz ARM Cortex A-53.
Device: Pinephone
Main Specs:
4 x ARM Cortex A53 cores @ 1.152 GHz
ARM Mali 400 MP2 GPU
2GB / 3GB LPDDR3 RAM
5.95″ LCD 1440×720, 18:9 aspect ratio (hardened glass)
Bootable Micro SD
Storage: 16GB / 32GB eMMC
Installing Mobian on Pinephone
for more detail on setup/installation see here as an example on mocha testnet
for installing a celesita light client (which is celestia-node initiated as light client) follow the ‘Celestia Light Node for ARM Devices setup’ section below.
As Mobian is Debian based, pretty much all install commands should work the same as the normal install, however the CPU is ARM based ‘4 x ARM Cortex A53 cores @ 1.152 GHz’ therefore a version of Go compatible with ARM is required to build Celestia.
Though not exactly mobile, single board computers (SBCs) are an ideal device for locally running light clients, due to low power consumption and small profile.
Ubuntu OS image for Raspberry Pi
for more detail on setup/installation see here full steps to install a light client on Rpi:
As you can see from the Specs, there is an ARM based CPU
for installing a celesita light client (which is celestia-node initiated as light client) follow the ‘Celestia Light Node for ARM Devices setup’ section below.
For any ARM based device using Debian (mobian) / or Ubuntu OS: the following install script can be used from here:
wget https://raw.githubusercontent.com/GLCNI/celestia-node-scripts/main/multi-network/light-node-ARM.sh && chmod a+x light-node-ARM.sh
./light-node-ARM.sh
Install dependencies
sudo apt update
sudo apt install curl tar wget clang pkg-config libssl-dev jq build-essential bsdmainutils git make ncdu -y
NOTE: advised to update via the built in software updater, as running ‘apt update’ may break things related to the device with compatibility issues (on pinephone the UI was basically unusable after this)
Install Go (for ARM)
ver="1.20.3"
cd $HOME
wget "https://golang.org/dl/go$ver.linux-arm64.tar.gz"
sudo rm -rf /usr/local/go
sudo tar -C /usr/local -xzf "go$ver.linux-arm64.tar.gz"
rm "go$ver.linux-arm64.tar.gz"
# add to PATH
echo 'export PATH=$PATH:/usr/local/go/bin:$HOME/go/bin' >> $HOME/.bash_profile
source $HOME/.bash_profile
Install Celestia node
git clone https://github.com/celestiaorg/celestia-node.git
cd celestia-node
git checkout tags <version>
make build
sudo make install
make cel-key
Initiate as light node
celestia light init --p2p.network <network>
Setup service
sudo tee <<EOF >/dev/null /etc/systemd/system/celestia-lightd.service
[Unit]
Description=celestia-lightd Light Node
After=network-online.target
[Service]
User=root
ExecStart=/usr/local/bin/celestia light start --core.ip <gRPC endpoint>
Restart=on-failure
RestartSec=3
LimitNOFILE=4096
[Install]
WantedBy=multi-user.target"
EOF
Device- Steam Deck
Deck comes installed with SteamOS which is based on Arch Linux, its a quite powerful handheld/portable gaming console, Arch Linux is growing in popularity among gaming with Linux.
This was tested with a full storage node, though it makes much more sense for a light client, as something that is not intended to be run 24/7, however I wanted to make use of the specs (500GB NVMe) and test out if it could run it.
Light client is part of celestia-node to run instead simply switch full > light where referenced in commands
this distribution does not come with ‘apt repository’ for installing packages, instead pacman as the default package manager, Its highly recommended to use one package manager as mixing can lead to conflicts and broken dependencies.
For Steam Deck only : Unlocking the Steam Deck:
SYSTEM SETTINGS and select Enable Developer mode, then press A to toggle it on. This will expose a new Settings menu called "Developer" which contains settings specific to game developers and people who are interested in modding the Steam Deck.
On Desktop mode the konsole should be visible, this is the terminal for SteamOS
Add a Password: sudo commands will ask for a password, even if none is set enter passwd and set new password
Default user is deck
Disable Read Only Mode:
sudo steamos-readonly disable
echo "keyserver hkps://keyserver.ubuntu.com" | sudo tee -a /etc/pacman.d/gnupg/gpg.conf
sudo pacman-key --init
sudo pacman-key --populate
sudo pacman-key --refresh-keys
Notes: refresh keys will take a while to complete, as it is trying to refresh all the keys in the keyring.
Might get a warning like: gpg: WARNING: running with faked system time: 2023-01-01 00:00:00 it's likely that the warning is related to the Steam Deck's setup, and it shouldn’t have any significant impact on system's functionality.
Add ssh - optional
sudo pacman -S openssh
sudo systemctl enable sshd
sudo systemctl start sshd
# to change port
sudo nano /etc/ssh/sshd_config #change port 22
sudo systemctl restart sshd
Install and Enable ufw - optional
sudo pacman -S ufw
sudo systemctl enable ufw
sudo systemctl start ufw
sudo ufw allow <port>
Install Dependencies
sudo pacman -Syu curl tar wget clang pkgconf openssl jq base-devel git make ncdu
NOTES: Differences from Ubuntu/Debian- libssl-dev is replaced with openssl, and pkg-config is replaced with pkgconf. Also, build-essential is replaced by base-devel.
Installing go
SteamDeck: .bashrc exists and seems to be used as default variable store, and comes with Go v0.19 installed and in the /usr/bin/ directory, as this is likely a dependency for other related packages to not break things its best to leave this.
Celestia node requires v1.20, and we can install this binary in a separate location to be used for Celestia only.
ver=1.20.2
wget <AMD URL HERE>
sudo tar -C /usr/local -xzf “go$ver.linux-amd64.tar.gz”
Add go to PATH
here can see that normally v1.19 is used, but with go added to the PATH we can source .bash_profile for celestia applications and use this version only.
Install celestia-node
Same as the Normal Install, however may have issues with make on this OS
cd $HOME
rm -rf celestia-node
git clone https://github.com/celestiaorg/celestia-node.git
cd celestia-node/
git checkout tags/v0.9.4 #check version for which network
make build
sudo make install
make cel-key
Problems with make - Additional Packages
there are additional packages, needed that may not come as standard on SteamOS (Arch Linux) or need to be reinstalled to `make build`
sudo pacman -Sy isl
sudo pacman -Sy libmpc
sudo pacman -Sy gcc-libs glibc
sudo pacman -Sy linux-api-headers
sudo pacman -Sy make
The warnings shown are because `pacman` could not find the expected files on your system before reinstalling the package. So long as we get to ‘make build’ with the expected output (shown above) everything is in order and packages should be installed correctly.
Initialize celestia node type
celestia full init --p2p.network blockspacerace
for light client use light this test was on blockspacerace network, this should be changed to desired network
Run the Node
setup a system service to run the node, from this example:
Node Started and syncing
Viewing logs directly on device, from brief testing all normal functions on the deck appear to work normally.
Mobian is an open-source project aimed at bringing Debian GNU/Linux to mobile devices, such as smartphones and tablets. The project's goal is to provide a Debian-based fully-featured desktop environment that is optimized for touch input while using the mainline Linux kernel.
Mobian, primarily supporting PinePhone and Librem 5, is a developing Linux-based mobile OS. Though not as polished or feature-rich as mainstream OS like Android or iOS, it's actively updated and improving (see releases).
The process should be similar for any compatible OS and device. I am using PinePhone an Open Source phone supporting existing Linux-on-phone projects. This has only 3GB RAM and an internal flash memory of 32GB eMMC, CPU: 64-bit Quad-core 1.2 GHz ARM Cortex A-53.
Device: Pinephone
Main Specs:
4 x ARM Cortex A53 cores @ 1.152 GHz
ARM Mali 400 MP2 GPU
2GB / 3GB LPDDR3 RAM
5.95″ LCD 1440×720, 18:9 aspect ratio (hardened glass)
Bootable Micro SD
Storage: 16GB / 32GB eMMC
Installing Mobian on Pinephone
for more detail on setup/installation see here as an example on mocha testnet
for installing a celesita light client (which is celestia-node initiated as light client) follow the ‘Celestia Light Node for ARM Devices setup’ section below.
As Mobian is Debian based, pretty much all install commands should work the same as the normal install, however the CPU is ARM based ‘4 x ARM Cortex A53 cores @ 1.152 GHz’ therefore a version of Go compatible with ARM is required to build Celestia.
Though not exactly mobile, single board computers (SBCs) are an ideal device for locally running light clients, due to low power consumption and small profile.
Ubuntu OS image for Raspberry Pi
for more detail on setup/installation see here full steps to install a light client on Rpi:
As you can see from the Specs, there is an ARM based CPU
for installing a celesita light client (which is celestia-node initiated as light client) follow the ‘Celestia Light Node for ARM Devices setup’ section below.
For any ARM based device using Debian (mobian) / or Ubuntu OS: the following install script can be used from here:
wget https://raw.githubusercontent.com/GLCNI/celestia-node-scripts/main/multi-network/light-node-ARM.sh && chmod a+x light-node-ARM.sh
./light-node-ARM.sh
Install dependencies
sudo apt update
sudo apt install curl tar wget clang pkg-config libssl-dev jq build-essential bsdmainutils git make ncdu -y
NOTE: advised to update via the built in software updater, as running ‘apt update’ may break things related to the device with compatibility issues (on pinephone the UI was basically unusable after this)
Install Go (for ARM)
ver="1.20.3"
cd $HOME
wget "https://golang.org/dl/go$ver.linux-arm64.tar.gz"
sudo rm -rf /usr/local/go
sudo tar -C /usr/local -xzf "go$ver.linux-arm64.tar.gz"
rm "go$ver.linux-arm64.tar.gz"
# add to PATH
echo 'export PATH=$PATH:/usr/local/go/bin:$HOME/go/bin' >> $HOME/.bash_profile
source $HOME/.bash_profile
Install Celestia node
git clone https://github.com/celestiaorg/celestia-node.git
cd celestia-node
git checkout tags <version>
make build
sudo make install
make cel-key
Initiate as light node
celestia light init --p2p.network <network>
Setup service
sudo tee <<EOF >/dev/null /etc/systemd/system/celestia-lightd.service
[Unit]
Description=celestia-lightd Light Node
After=network-online.target
[Service]
User=root
ExecStart=/usr/local/bin/celestia light start --core.ip <gRPC endpoint>
Restart=on-failure
RestartSec=3
LimitNOFILE=4096
[Install]
WantedBy=multi-user.target"
EOF
<100 subscribers
<100 subscribers
No activity yet