GLCstakedSUI Network - complete guide to run a Node & Validator
SUI is a layer 1 blockchain designed by Mysten Labs from the ground up in smart contract specific language called MOVE This guide will go over installing a Full Node and Validator from scratch in order to run a Sui network node, assumes a fresh install of Ubuntu 20.04LTS. Hardware Requirements: Node Requirements: Full node requirements are lower, but storage can be expected to increase over time CPUs: 2 RAM: 8GB Storage: 50GB Validator Requirements: Validators perform work and deal with chain...
GLCstakedEasy Guide to Gnosischain Validator - with Lighthouse
This guide is help you set up a Gnosischain Validator, this will cover the full set up on a local device installed with Ubuntu 20.04 LTS. We will be using Lighthouse for consensus layer client and Nethermind for our Execution layer client. Gnosischain merge is on the horizon, this guide is intended to be merge ready the set up will cover steps and configuration needed to run post merge, and today. Gnosischain is using Ethereum Proof of Stake consensus with the Beacon chain to select validator...
GLCstakedCosmos Full Node
Deploy a full node for cosmos chain Cosmos hub is the economic centre of the Interchain cosmos ecosystem. Full node is a node that does not build blocks (non-validating) but stores the chain state and allows direct access to the network. NOTE: full node refers to a non-archival implementation of the node.Cosmos: The Internet of BlockchainsCosmos is an ever-expanding ecosystem of interoperable and sovereign blockchain apps and services, built for a decentralized future.https://cosmos.networkHa...
$ETH Solo Staker #stakefromhome
GLCstakedSUI Network - complete guide to run a Node & Validator
SUI is a layer 1 blockchain designed by Mysten Labs from the ground up in smart contract specific language called MOVE This guide will go over installing a Full Node and Validator from scratch in order to run a Sui network node, assumes a fresh install of Ubuntu 20.04LTS. Hardware Requirements: Node Requirements: Full node requirements are lower, but storage can be expected to increase over time CPUs: 2 RAM: 8GB Storage: 50GB Validator Requirements: Validators perform work and deal with chain...
GLCstakedEasy Guide to Gnosischain Validator - with Lighthouse
This guide is help you set up a Gnosischain Validator, this will cover the full set up on a local device installed with Ubuntu 20.04 LTS. We will be using Lighthouse for consensus layer client and Nethermind for our Execution layer client. Gnosischain merge is on the horizon, this guide is intended to be merge ready the set up will cover steps and configuration needed to run post merge, and today. Gnosischain is using Ethereum Proof of Stake consensus with the Beacon chain to select validator...
GLCstakedCosmos Full Node
Deploy a full node for cosmos chain Cosmos hub is the economic centre of the Interchain cosmos ecosystem. Full node is a node that does not build blocks (non-validating) but stores the chain state and allows direct access to the network. NOTE: full node refers to a non-archival implementation of the node.Cosmos: The Internet of BlockchainsCosmos is an ever-expanding ecosystem of interoperable and sovereign blockchain apps and services, built for a decentralized future.https://cosmos.networkHa...
$ETH Solo Staker #stakefromhome
Subscribe to GLCstaked
Subscribe to GLCstaked
Share Dialog
Share Dialog
<100 subscribers
<100 subscribers
Setup a Celestia Light Client on ARM based single board computer such as Raspberry Pi/Rock SBCs, this example using a Raspberry Pi4-B
Light Nodes conduct data availability sampling on the Celestia Data Availability network. More info on Light nodes found here.
Raspberry Pi is the most popular single board computer, uses ARM based CPU and the steps for installation are the same for any ARM device including mobile here. A setup script, for easier install is available here:
deployment scripts for celestia nodes. Contribute to GLCNI/celestia-node-scripts development by creating an account on GitHub.
Hardware – using a Raspberry Pi 4 Model B with 4GB RAM, Storage 32GB mSD Card OS: Ubuntu desktop 22.04.1 LTS
Download R-Pi Imager
https://www.raspberrypi.com/software/
You can install this on Windows or OS of choice, you need something to flash the OS image of Ubuntu to the SBC board, in this case a Raspberry pi 4. This is software to flash the OS image to bootable storage for the SBC.
Download Ubuntu OS image
Ubuntu for ARM can be found here.
Ubuntu is an open-source operating system for cross-platform development, there's no better place to get started than with Ubuntu on a Raspberry Pi
Easiest to work with is the Ubuntu Desktop image. You can find on this page suitable OS version for which version of SBC, in this case ‘Ubuntu Desktop 22.04.1 LTS 64bit’
for 20.04 LTS you can install a server version for R-Pi here. ‘Raspberry Pi Generic (64-bit ARM) preinstalled server image’. UI can be installed via terminal sudo apt-get install ubuntu-desktop
Format Storage
Using an SD card as this is where the R-Pi will boot from first (by default), first format the card before it can be flashed with the image installed previous, can use the disk management tool on windows.
Flash SD with Ubuntu
Using the Raspberry Pi Imager tool, Select ‘use custom image’ for the operating system we previously downloaded (Ubuntu 22.04.1), then select the storage (ensure formatted and connected), click on write to start the process, can take a while to complete.
Setup Ubuntu on Device (R-pi)
On first start-up it’s the same for setting up ubuntu anywhere else, follow the on-screen prompts, this only needs to be done once. Once logged in connect to the internet and update the device via the ‘software updater’.
Easier way to install Light client is via the script below and downloading for ARM devices, this just automates the steps from this document. Or to do manually follow from Step 2.
deployment scripts for celestia nodes. Contribute to GLCNI/celestia-node-scripts development by creating an account on GitHub.
This must be done as root user sudo -i
wget https://raw.githubusercontent.com/GLCNI/celestia-node-scripts/main/light-node-ARM/cel-light-arm.sh
make executable and run script
chmod a+x cel-light-arm.sh
./cel-light-arm.sh
Change to root user
sudo -i
Can exit root anytime with exit
Install packages
sudo apt update
sudo apt install curl tar wget clang pkg-config libssl-dev jq build-essential bsdmainutils git make ncdu -y
Install Go
cd /tmp && wget https://go.dev/dl/go1.19.1.linux-arm64.tar.gz
tar -C /usr/local/ -xzf go1.19.1.linux-arm64.tar.gz
add go to PATH
cd /usr/local/ && echo "export PATH=$PATH:/usr/local/go/bin:$HOME/go/bin" >> ~/.bashrc && echo "export GOROOT=/usr/local/go" >> ~/.bashrc && echo "export PATH=$PATH:/usr/local/go/bin:$HOME/go/bin" >> /home//.bashrc && echo "export GOROOT=/usr/local/go" >> /home//.bashrc && source ~/.bashrc && source /home/*/.bashrc
confirm go installed
go version
cd $HOME
rm -rf celestia-node
git clone https://github.com/celestiaorg/celestia-node.git
cd celestia-node/
git checkout tags/v0.6.0
make install
make cel-key
Initiate node as a light client
celestia light init
Requires gRPC endpoint to connect to a validator node, replace the $RPC_ENDPOINT with : available endpoint from here:
tee <<EOF >/dev/null /etc/systemd/system/celestia-lightd.service
[Unit]
Description=celestia-lightd Light Node
After=network-online.target
[Service]
User=root
ExecStart=/usr/local/bin/celestia light start --core.ip $RPC_ENDPOINT
Restart=on-failure
RestartSec=3
LimitNOFILE=4096
[Install]
WantedBy=multi-user.target"
EOF
Enable and start service
systemctl enable celestia-lightd
systemctl daemon-reload
systemctl start celestia-lightd
Logs can be viewed with
journalctl -u celestia-lightd.service -f
The service can be stopped with
systemctl stop celestia-lightd
A wallet is created for you on start up, to pay for data transactions this must be funded, you can find wallet with (in ./celestia-node)
cd celestia-node
./cel-key list --node.type light --keyring-backend test
Setup a Celestia Light Client on ARM based single board computer such as Raspberry Pi/Rock SBCs, this example using a Raspberry Pi4-B
Light Nodes conduct data availability sampling on the Celestia Data Availability network. More info on Light nodes found here.
Raspberry Pi is the most popular single board computer, uses ARM based CPU and the steps for installation are the same for any ARM device including mobile here. A setup script, for easier install is available here:
deployment scripts for celestia nodes. Contribute to GLCNI/celestia-node-scripts development by creating an account on GitHub.
Hardware – using a Raspberry Pi 4 Model B with 4GB RAM, Storage 32GB mSD Card OS: Ubuntu desktop 22.04.1 LTS
Download R-Pi Imager
https://www.raspberrypi.com/software/
You can install this on Windows or OS of choice, you need something to flash the OS image of Ubuntu to the SBC board, in this case a Raspberry pi 4. This is software to flash the OS image to bootable storage for the SBC.
Download Ubuntu OS image
Ubuntu for ARM can be found here.
Ubuntu is an open-source operating system for cross-platform development, there's no better place to get started than with Ubuntu on a Raspberry Pi
Easiest to work with is the Ubuntu Desktop image. You can find on this page suitable OS version for which version of SBC, in this case ‘Ubuntu Desktop 22.04.1 LTS 64bit’
for 20.04 LTS you can install a server version for R-Pi here. ‘Raspberry Pi Generic (64-bit ARM) preinstalled server image’. UI can be installed via terminal sudo apt-get install ubuntu-desktop
Format Storage
Using an SD card as this is where the R-Pi will boot from first (by default), first format the card before it can be flashed with the image installed previous, can use the disk management tool on windows.
Flash SD with Ubuntu
Using the Raspberry Pi Imager tool, Select ‘use custom image’ for the operating system we previously downloaded (Ubuntu 22.04.1), then select the storage (ensure formatted and connected), click on write to start the process, can take a while to complete.
Setup Ubuntu on Device (R-pi)
On first start-up it’s the same for setting up ubuntu anywhere else, follow the on-screen prompts, this only needs to be done once. Once logged in connect to the internet and update the device via the ‘software updater’.
Easier way to install Light client is via the script below and downloading for ARM devices, this just automates the steps from this document. Or to do manually follow from Step 2.
deployment scripts for celestia nodes. Contribute to GLCNI/celestia-node-scripts development by creating an account on GitHub.
This must be done as root user sudo -i
wget https://raw.githubusercontent.com/GLCNI/celestia-node-scripts/main/light-node-ARM/cel-light-arm.sh
make executable and run script
chmod a+x cel-light-arm.sh
./cel-light-arm.sh
Change to root user
sudo -i
Can exit root anytime with exit
Install packages
sudo apt update
sudo apt install curl tar wget clang pkg-config libssl-dev jq build-essential bsdmainutils git make ncdu -y
Install Go
cd /tmp && wget https://go.dev/dl/go1.19.1.linux-arm64.tar.gz
tar -C /usr/local/ -xzf go1.19.1.linux-arm64.tar.gz
add go to PATH
cd /usr/local/ && echo "export PATH=$PATH:/usr/local/go/bin:$HOME/go/bin" >> ~/.bashrc && echo "export GOROOT=/usr/local/go" >> ~/.bashrc && echo "export PATH=$PATH:/usr/local/go/bin:$HOME/go/bin" >> /home//.bashrc && echo "export GOROOT=/usr/local/go" >> /home//.bashrc && source ~/.bashrc && source /home/*/.bashrc
confirm go installed
go version
cd $HOME
rm -rf celestia-node
git clone https://github.com/celestiaorg/celestia-node.git
cd celestia-node/
git checkout tags/v0.6.0
make install
make cel-key
Initiate node as a light client
celestia light init
Requires gRPC endpoint to connect to a validator node, replace the $RPC_ENDPOINT with : available endpoint from here:
tee <<EOF >/dev/null /etc/systemd/system/celestia-lightd.service
[Unit]
Description=celestia-lightd Light Node
After=network-online.target
[Service]
User=root
ExecStart=/usr/local/bin/celestia light start --core.ip $RPC_ENDPOINT
Restart=on-failure
RestartSec=3
LimitNOFILE=4096
[Install]
WantedBy=multi-user.target"
EOF
Enable and start service
systemctl enable celestia-lightd
systemctl daemon-reload
systemctl start celestia-lightd
Logs can be viewed with
journalctl -u celestia-lightd.service -f
The service can be stopped with
systemctl stop celestia-lightd
A wallet is created for you on start up, to pay for data transactions this must be funded, you can find wallet with (in ./celestia-node)
cd celestia-node
./cel-key list --node.type light --keyring-backend test
No activity yet