FrogLayer3: fastest 100 cubes
If you want more free content like this join my telegram or discord if you prefer that. Here is a list of the easiest Layer3 cubes to get to 100 cubes the fastest: If you don’t have a Layer3, make one using my ref ❤️Base Onchain Daily - The CodexIntro to CubesActivate 2x XP (Optional, we will activate 3x shortly) Refuel Fuse, Blast, Metis, Linea, Avax using LayerZero Refuel Celo, Mode, Zeta, Polygon ZkEVM using Gas Zip Refuel Zora using relayCubes on Fuse NetworkCubes on ArbitrumActivate Swap...
FrogLayerZero: Airdrop guide
IntroductionLayerZero is an omnichain interoperability protocol designed for lightweight message passing across chains. It currently is used on the backend of a lot of protocols, but currently has no tokens. The protocols that use it however do, most popular of which is Stargate ($STG). Stargate was created by the LayerZero team so that’s why it’s so heavily emphasized in this guide.Getting StartedJoin the LayerZero discordJoin the Stargate discordFollow LayerZero on TwitterFollow me on twitt...
FrogLinea: Airdrop Guide
IntroductionLinea is an innovative zkEVM Layer 2 (L2) made by ConsenSys.Getting StartedWebsiteGet started with testnetManually add the RPC hereEcosystemFollow me on twitter <3Join LilyPad for discussion on this and other airdropsSay GMLinea TestnetAdd the RPC to your Metamask (It is actually now added by default just press show/hide testnets on metamask)Bridge here on HOP (I provided liquidity as well)Uniswap Fork: Make some swaps here currently you can only wrap ETH into crWETH and swap into...
Come say hello https://t.me/lilypadcrypto 🐸
FrogLayer3: fastest 100 cubes
If you want more free content like this join my telegram or discord if you prefer that. Here is a list of the easiest Layer3 cubes to get to 100 cubes the fastest: If you don’t have a Layer3, make one using my ref ❤️Base Onchain Daily - The CodexIntro to CubesActivate 2x XP (Optional, we will activate 3x shortly) Refuel Fuse, Blast, Metis, Linea, Avax using LayerZero Refuel Celo, Mode, Zeta, Polygon ZkEVM using Gas Zip Refuel Zora using relayCubes on Fuse NetworkCubes on ArbitrumActivate Swap...
FrogLayerZero: Airdrop guide
IntroductionLayerZero is an omnichain interoperability protocol designed for lightweight message passing across chains. It currently is used on the backend of a lot of protocols, but currently has no tokens. The protocols that use it however do, most popular of which is Stargate ($STG). Stargate was created by the LayerZero team so that’s why it’s so heavily emphasized in this guide.Getting StartedJoin the LayerZero discordJoin the Stargate discordFollow LayerZero on TwitterFollow me on twitt...
FrogLinea: Airdrop Guide
IntroductionLinea is an innovative zkEVM Layer 2 (L2) made by ConsenSys.Getting StartedWebsiteGet started with testnetManually add the RPC hereEcosystemFollow me on twitter <3Join LilyPad for discussion on this and other airdropsSay GMLinea TestnetAdd the RPC to your Metamask (It is actually now added by default just press show/hide testnets on metamask)Bridge here on HOP (I provided liquidity as well)Uniswap Fork: Make some swaps here currently you can only wrap ETH into crWETH and swap into...
Come say hello https://t.me/lilypadcrypto 🐸
Subscribe to Frog
Subscribe to Frog
Share Dialog
Share Dialog
<100 subscribers
<100 subscribers
Before purchasing your server and setting everything up, I recommend trying to acquire some SHM from the faucets first. You will need Sphinx 1.X SHM tokens. Here is the guide from Shardeum on how to get them:
https://docs.shardeum.org/Faucet/Claim
You can also ask around the discord for tokens from admins or other community members.
If you can find your own VPS that is cheaper that is fine but here are the minimum requirements:
Before purchasing your server and setting everything up, I recommend trying to acquire some SHM from the faucets first. You will need Sphinx 1.X SHM tokens. Here is the guide from Shardeum on how to get them:
https://docs.shardeum.org/Faucet/Claim
You can also ask around the discord for tokens from admins or other community members.
If you can find your own VPS that is cheaper that is fine but here are the minimum requirements:
250 GB SSD storageQuad core CPU less than 10 years old if self hosting
Dual core CPU works if hosted with newer Xeons / EPYC
16 GB of ram, 4+ GB of virtual memory recommended
Hosting: 8 GB RAM + 8 GB Virtual Memory
Or you can just head to Contabo below with a preconfigured setup for this guide (NOT a referral link) It will cost you about 70 bucks for 3 months.
Just make sure you select a region close to you!
Type in a password for your server. Remember this.
Everything else is good to go!
Press Next and type in all the information needed to create a new account and pay for the server.
Once you complete your order, you will receive a total of 2 emails. The first being an order confirmation email, and should come within the first 5 minutes (usually instantly). The 2nd email is the information you need to login, this may take up to 30 minutes - an hour. Be patient it will come.
Head over to the control panel:
Login with the credentials received in the 2nd email from Contabo.
Under Control Panel click into Your Services on the sidebar.
All you will need from this page is the IP address.
These next steps vary depending on which operating system you are using:
Open up terminal
type ssh root@<ip_address> (Replace with the IP you have in your clipboard from the Contabo Control Panel)
It will prompt you for your password type in the password you made at setup.
If you are using Windows:
Download Putty (Follow this guide if you need assistance)
Open up Putty
Paste your IP address under Host Name and press Open. (Leave the port as 22)
Type root as your username (then press enter) and type in the password you made at setup.
Now we are synced up on both ends.
https://docs.shardeum.org/node/run/validator#install-package-managers
Just follow the command prompts and you are good to go!
When it comes to connecting to the validator dashboard:
Tell me if I missed something by joining my Telegram Chat :D
Remove Stake from Dashboard
At this point my dashboard crashed so what i did was: (You can skip these steps if yours doesn’t crash)
Connect thru ssh to the server again
cd: make sure you are in root folder
cd .shardeum: go to shardeum folder
./shell.sh
operator-cli gui startNow use the front end to STOP the node.
operator-cli update
operator-cli gui startStake your shardeum again thru the front end and start the node :)
lilyPadBotCommand: ShardeumValidator
lilyPadBotDescription: Setting up a testnet validator for Shardeum
250 GB SSD storageQuad core CPU less than 10 years old if self hosting
Dual core CPU works if hosted with newer Xeons / EPYC
16 GB of ram, 4+ GB of virtual memory recommended
Hosting: 8 GB RAM + 8 GB Virtual Memory
Or you can just head to Contabo below with a preconfigured setup for this guide (NOT a referral link) It will cost you about 70 bucks for 3 months.
Just make sure you select a region close to you!
Type in a password for your server. Remember this.
Everything else is good to go!
Press Next and type in all the information needed to create a new account and pay for the server.
Once you complete your order, you will receive a total of 2 emails. The first being an order confirmation email, and should come within the first 5 minutes (usually instantly). The 2nd email is the information you need to login, this may take up to 30 minutes - an hour. Be patient it will come.
Head over to the control panel:
Login with the credentials received in the 2nd email from Contabo.
Under Control Panel click into Your Services on the sidebar.
All you will need from this page is the IP address.
These next steps vary depending on which operating system you are using:
Open up terminal
type ssh root@<ip_address> (Replace with the IP you have in your clipboard from the Contabo Control Panel)
It will prompt you for your password type in the password you made at setup.
If you are using Windows:
Download Putty (Follow this guide if you need assistance)
Open up Putty
Paste your IP address under Host Name and press Open. (Leave the port as 22)
Type root as your username (then press enter) and type in the password you made at setup.
Now we are synced up on both ends.
https://docs.shardeum.org/node/run/validator#install-package-managers
Just follow the command prompts and you are good to go!
When it comes to connecting to the validator dashboard:
Tell me if I missed something by joining my Telegram Chat :D
Remove Stake from Dashboard
At this point my dashboard crashed so what i did was: (You can skip these steps if yours doesn’t crash)
Connect thru ssh to the server again
cd: make sure you are in root folder
cd .shardeum: go to shardeum folder
./shell.sh
operator-cli gui startNow use the front end to STOP the node.
operator-cli update
operator-cli gui startStake your shardeum again thru the front end and start the node :)
lilyPadBotCommand: ShardeumValidator
lilyPadBotDescription: Setting up a testnet validator for Shardeum
No activity yet