GLCstakedSUI Network - complete guide to run a Node & Validator
SUI is a layer 1 blockchain designed by Mysten Labs from the ground up in smart contract specific language called MOVE This guide will go over installing a Full Node and Validator from scratch in order to run a Sui network node, assumes a fresh install of Ubuntu 20.04LTS. Hardware Requirements: Node Requirements: Full node requirements are lower, but storage can be expected to increase over time CPUs: 2 RAM: 8GB Storage: 50GB Validator Requirements: Validators perform work and deal with chain...
GLCstakedEasy Guide to Gnosischain Validator - with Lighthouse
This guide is help you set up a Gnosischain Validator, this will cover the full set up on a local device installed with Ubuntu 20.04 LTS. We will be using Lighthouse for consensus layer client and Nethermind for our Execution layer client. Gnosischain merge is on the horizon, this guide is intended to be merge ready the set up will cover steps and configuration needed to run post merge, and today. Gnosischain is using Ethereum Proof of Stake consensus with the Beacon chain to select validator...
GLCstakedCosmos Full Node
Deploy a full node for cosmos chain Cosmos hub is the economic centre of the Interchain cosmos ecosystem. Full node is a node that does not build blocks (non-validating) but stores the chain state and allows direct access to the network. NOTE: full node refers to a non-archival implementation of the node.Cosmos: The Internet of BlockchainsCosmos is an ever-expanding ecosystem of interoperable and sovereign blockchain apps and services, built for a decentralized future.https://cosmos.networkHa...
$ETH Solo Staker #stakefromhome
GLCstakedSUI Network - complete guide to run a Node & Validator
SUI is a layer 1 blockchain designed by Mysten Labs from the ground up in smart contract specific language called MOVE This guide will go over installing a Full Node and Validator from scratch in order to run a Sui network node, assumes a fresh install of Ubuntu 20.04LTS. Hardware Requirements: Node Requirements: Full node requirements are lower, but storage can be expected to increase over time CPUs: 2 RAM: 8GB Storage: 50GB Validator Requirements: Validators perform work and deal with chain...
GLCstakedEasy Guide to Gnosischain Validator - with Lighthouse
This guide is help you set up a Gnosischain Validator, this will cover the full set up on a local device installed with Ubuntu 20.04 LTS. We will be using Lighthouse for consensus layer client and Nethermind for our Execution layer client. Gnosischain merge is on the horizon, this guide is intended to be merge ready the set up will cover steps and configuration needed to run post merge, and today. Gnosischain is using Ethereum Proof of Stake consensus with the Beacon chain to select validator...
GLCstakedCosmos Full Node
Deploy a full node for cosmos chain Cosmos hub is the economic centre of the Interchain cosmos ecosystem. Full node is a node that does not build blocks (non-validating) but stores the chain state and allows direct access to the network. NOTE: full node refers to a non-archival implementation of the node.Cosmos: The Internet of BlockchainsCosmos is an ever-expanding ecosystem of interoperable and sovereign blockchain apps and services, built for a decentralized future.https://cosmos.networkHa...
$ETH Solo Staker #stakefromhome
Subscribe to GLCstaked
Subscribe to GLCstaked
Share Dialog
Share Dialog
<100 subscribers
<100 subscribers
$KYVE Token is integral part of the Kyve ecosystem which aligns incentives between all participants. You can Stake to earn rewards directly by running a Protocol Node or Chain Node yourself
Kyve supports delegation allowing token holders to participate by signalling on node runners/pools and earn a share of rewards from the following
Delegating stake to:
Protocol nodes: Protocol node operators validate data to receive ‘funding’ rewards, these data sources are various pools. This is made up of three participants
Funders: provide $KYVE tokens to fund a pool, this signals demand to have valid & archived data.
Validators: The Protocol Node operators, they collect data from a data source, bundling and uploading them to Arweave and verifying it.
Delegators: lend $KYVE tokens to validators, allowing the delegate to earn a share of the rewards and the operator to earn more in commission.
Consensus Nodes - Kyve Chain: Chain-Nodes are the backbone of KYVE. The chain layer is a completely sovereign Proof of Stake blockchain built on Cosmos SDK with Ignite, the chain node is the consensus layer of KYVE which handles security/consensus and settlement of KYVE. Chain Node operators run validator nodes to earn network fees and Kyve issuance rewards, $KYVE token holders can delegate to chain node validators to earn a share while allowing node operators to increase their rewards with commission.
We can get our hands on TESTNET $KYVE (if you haven’t already), this has NO VALUE, but you can get familiar with Kyve Network and test out the various mechanics to prepare, things may change slightly come mainnet when Kyve is economically live.
Keplr is an IBC enabled wallet for cosmos app-chains, Kyve network is built with cosmos SDK
Introducing Keplr, the fast, simple, secure wallet connecting you to any blockchains and apps. Pioneering its way in the multichain future from day one
Add the extension to chrome, or chromium browser such as brave
Follow the steps to ‘create a new account’, this will display your ‘seed phrase’ it’s important that you back this up, as its the only way to recover your wallet.
you will be asked to provide an account name and password, this can be whatever you want, confirm your seed phrase which you should have backed up (its best to back up on paper) your wallet can always be restored from the ‘seed phrase’
we need to add the Kyve Korellia Network to Keplr, head over to Kyve app which can be found on kyve.network
This will prompt you to confirm connection on Keplr, there will be two requests click ‘approve’ on both
If you go to Faucet, allows you to claim up to 300 KYVE after connecting your twitter account.
Make sure your wallet it connected, click ‘share on twitter’ to connect your account and tweet the pre-compiled message, once done copy the URL of the tweet paste the link in the bar to claim your tokens.
Pools
Head back to kyve.network and then over to Pools (on the left)
Select from multiple pools of your choosing. We are currently Operating a Protocol node on the Polkadot Pool, this may change from writing 12/8/22 but will announce any changes.
Look for us under Pool Validators and click on Delegate on the right. You can find us on this pool or any pool we operate on by searching for stakecat.space
Head over to Kyve chain Explorer and find the ‘Staking’ tab on the left.
Here we can find the active validators for Kyve chain
Connect Wallet
With Keplr Installed from before, click on ‘wallet’ on the right corner, then ‘accounts’ it will bring up the screen below, where you can ‘Connect Wallet’ to your Keplr extension.
Delegate to Validator
Now back to Validators (Korellia>Staking), you can now select a validator to delegate too by clicking on the ‘Delegate’ to the right.
Amount: Input the amount of KYVE to stake
The Fee: if the transaction doesn’t succeed, you might need a higher fee, make sure you are using the latest version of Keplr
Wallet: make sure Keplr is selected
Then Click send, Approve the Transaction that prompts in Keplr, after a few minutes you can see your staked amount on your wallet or by heading to your wallet>my delegations, where you can withdraw rewards or undelegate.
$KYVE Token is integral part of the Kyve ecosystem which aligns incentives between all participants. You can Stake to earn rewards directly by running a Protocol Node or Chain Node yourself
Kyve supports delegation allowing token holders to participate by signalling on node runners/pools and earn a share of rewards from the following
Delegating stake to:
Protocol nodes: Protocol node operators validate data to receive ‘funding’ rewards, these data sources are various pools. This is made up of three participants
Funders: provide $KYVE tokens to fund a pool, this signals demand to have valid & archived data.
Validators: The Protocol Node operators, they collect data from a data source, bundling and uploading them to Arweave and verifying it.
Delegators: lend $KYVE tokens to validators, allowing the delegate to earn a share of the rewards and the operator to earn more in commission.
Consensus Nodes - Kyve Chain: Chain-Nodes are the backbone of KYVE. The chain layer is a completely sovereign Proof of Stake blockchain built on Cosmos SDK with Ignite, the chain node is the consensus layer of KYVE which handles security/consensus and settlement of KYVE. Chain Node operators run validator nodes to earn network fees and Kyve issuance rewards, $KYVE token holders can delegate to chain node validators to earn a share while allowing node operators to increase their rewards with commission.
We can get our hands on TESTNET $KYVE (if you haven’t already), this has NO VALUE, but you can get familiar with Kyve Network and test out the various mechanics to prepare, things may change slightly come mainnet when Kyve is economically live.
Keplr is an IBC enabled wallet for cosmos app-chains, Kyve network is built with cosmos SDK
Introducing Keplr, the fast, simple, secure wallet connecting you to any blockchains and apps. Pioneering its way in the multichain future from day one
Add the extension to chrome, or chromium browser such as brave
Follow the steps to ‘create a new account’, this will display your ‘seed phrase’ it’s important that you back this up, as its the only way to recover your wallet.
you will be asked to provide an account name and password, this can be whatever you want, confirm your seed phrase which you should have backed up (its best to back up on paper) your wallet can always be restored from the ‘seed phrase’
we need to add the Kyve Korellia Network to Keplr, head over to Kyve app which can be found on kyve.network
This will prompt you to confirm connection on Keplr, there will be two requests click ‘approve’ on both
If you go to Faucet, allows you to claim up to 300 KYVE after connecting your twitter account.
Make sure your wallet it connected, click ‘share on twitter’ to connect your account and tweet the pre-compiled message, once done copy the URL of the tweet paste the link in the bar to claim your tokens.
Pools
Head back to kyve.network and then over to Pools (on the left)
Select from multiple pools of your choosing. We are currently Operating a Protocol node on the Polkadot Pool, this may change from writing 12/8/22 but will announce any changes.
Look for us under Pool Validators and click on Delegate on the right. You can find us on this pool or any pool we operate on by searching for stakecat.space
Head over to Kyve chain Explorer and find the ‘Staking’ tab on the left.
Here we can find the active validators for Kyve chain
Connect Wallet
With Keplr Installed from before, click on ‘wallet’ on the right corner, then ‘accounts’ it will bring up the screen below, where you can ‘Connect Wallet’ to your Keplr extension.
Delegate to Validator
Now back to Validators (Korellia>Staking), you can now select a validator to delegate too by clicking on the ‘Delegate’ to the right.
Amount: Input the amount of KYVE to stake
The Fee: if the transaction doesn’t succeed, you might need a higher fee, make sure you are using the latest version of Keplr
Wallet: make sure Keplr is selected
Then Click send, Approve the Transaction that prompts in Keplr, after a few minutes you can see your staked amount on your wallet or by heading to your wallet>my delegations, where you can withdraw rewards or undelegate.
No activity yet