本文讲从EVM操作码的角度，研究storage、memory、calldata的数据拷贝。

solidity version = 0.8.15，optimizer = false，evm_version = "london"

在线反汇编 https://ethervm.io/decompile

由于字节码阅读起来较为麻烦，本文主要分析反汇编后的代码。

有兴趣的同学可以自行逐行研究evm操作码。

contract Test {
    uint256[3] storage_numbers1;
    uint256[3] storage_numbers2;

    function test() public {
        storage_numbers1 = storage_numbers2;
    }
}

反汇编代码如下，test函数大致对应func_0035(), func_0035()确认了两个数组的长度(0x03), 然后进入func_0048.

我们主要关注func_0048里的storage[temp5] = storage[temp4]; 这其实是在一个goto循环里，会把数组中storage_numbers2中的每一个元素复制到storage_numbers1中。

可见，storage之间的赋值是深拷贝。

contract Contract {
    function main() {
        ......
        func_0035();
        stop();
    }
    
    function func_0035() {
        var var0 = 0x45;
        var var1 = 0x00;
        var var2 = 0x03;
        var var3 = 0x03;
        var0 = func_0048(var1, var2, var3);
    }
    
    function func_0048(var arg0, var arg1, var arg2) returns (var r0) {
        var var0 = arg0;
        var temp0 = arg1;
        arg1 = var0 + 0x03;
        var var1 = temp0;
    
        if (!arg2) {
            ......
        } else {
            var temp2 = arg2;
            var temp3 = var1;
            arg2 = temp3;
            var1 = arg2 + temp2;
        
            if (var1 <= arg2) {
            label_0070:
                goto label_0071;
            } else {
            label_005F:
                var temp4 = arg2;
                var temp5 = var0;
                storage[temp5] = storage[temp4];
                arg2 = temp4 + 0x01;
                var1 = var1;
                var0 = temp5 + 0x01;
            
                if (var1 <= arg2) { goto label_0070; }
                else { goto label_005F; }
            }
        }
    }
}

contract Test {
    uint256[3] storage_numbers1;
    uint256 n;

    function test() public {
        uint256[3] storage local1 = storage_numbers1;
        uint256[3] storage local2 = local1;

        // add this to avoid being opt out
        n = local2[1];
    }
}

反汇编代码如下.

在汇编代码里看不到storage复制的痕迹。

solidity的两行代码对应func_0035()中的：

var var1 = var0; var var2 = var1;

local storage相当于storage的指针(storage的slot编号)，storage/local storage → local storage只是指针的赋值，显然属于浅拷贝。

contract Contract {
    function main() {
        ......
        func_0035();
        stop();
    }
    
    function func_0035() {
        var var0 = 0x00;
        var var1 = var0;
        var var2 = var1;
        var var3 = 0x01;
    
        if (var3 < 0x03) {
            storage[0x03] = storage[var3 + var2];
            return;
        } else {
            ....
        }
    }
}

contract Test {
    uint256[3] storage_numbers;

    function test() public {
        uint256[3] storage local = storage_numbers;
        storage_numbers = local;
    }
}

反汇编代码如下。

主要的拷贝逻辑在func_004A，我们看到赋值语句storage[temp4] = storage[temp3];在一个goto循环里，说明这个函数会拷贝数组中的每一个值。

显然，local storage→storage是深拷贝，过程和storage→storage类似。

contract Contract {
    function main() {
        ......
        func_0035();
        stop();
    }
    
    function func_0035() {
        var var0 = 0x00;
        var var1 = 0x46;
        var var2 = 0x00;
        var var3 = var0;
        var var4 = 0x03;
        var1 = func_004A(var2, var3, var4);
    }
    
    function func_004A(var arg0, var arg1, var arg2) returns (var r0) {
        var var0 = arg0;
        var var1 = arg1;
        arg1 = var0 + 0x03;
    
        if (!arg2) {
        label_0073:
            ......
        } else {
            var temp1 = arg2;
            var temp2 = var1;
            arg2 = temp2;
            var1 = arg2 + temp1;
        
            if (var1 <= arg2) {
            label_0072:
                goto label_0073;
            } else {
            label_0061:
                var temp3 = arg2;
                var temp4 = var0;
                storage[temp4] = storage[temp3];
                arg2 = temp3 + 0x01;
                var0 = temp4 + 0x01;
                var1 = var1;
            
                if (var1 <= arg2) { goto label_0072; }
                else { goto label_0061; }
            }
        }
    }
}

contract Test {
    uint256[3] storage_numbers;
    uint256 n;

    function test() public {
        uint256[3] storage local = storage_numbers;
        uint256[3] memory m1 = local;

        // add this to avoid being opt out
        n = m1[1];
    }
}

反汇编代码如下.

复制对应代码为memory[temp5:temp5 + 0x20] = storage[temp4];这个语句也在一个goto循环中，storage中的每一个元素都会被复制到memory中。

可见storage/local storage→memory是深拷贝。

contract Contract {
    function main() {
        ......
        func_0035();
        stop();
    }
    
    function func_0035() {
        var var0 = 0x00;
        var var1 = var0;
        var temp0 = memory[0x40:0x60];
        memory[0x40:0x60] = temp0 + 0x20 * 0x03;
        var var2 = temp0;
        var var3 = var1;
        var var5 = var2;
        var var4 = 0x03;
        var var6 = var3;
        var var7 = 0x03;
    
        if (!var7) {
        label_006E:
            ......
        } else {
            var temp1 = var5;
            var temp2 = temp1 + var7 * 0x20;
            var5 = temp2;
            var temp3 = var6;
            memory[temp1:temp1 + 0x20] = storage[temp3];
            var7 = temp1 + 0x20;
            var6 = temp3 + 0x01;
        
            if (var5 <= var7) { goto label_006E; }
        
        label_005B:
            var temp4 = var6;
            var temp5 = var7;
            memory[temp5:temp5 + 0x20] = storage[temp4];
            var7 = temp5 + 0x20;
            var6 = temp4 + 0x01;
        
            if (var5 > var7) { goto label_005B; }
            else { goto label_006E; }
        }
    }
}

contract Test {
    // uint256[3] storage_numbers;
    uint256 n;

    function test() public {
        uint256[3] memory m1;
        uint256[3] memory m2 = m1;

        // add this to avoid being opt out
        n = m2[1];
    }
}

反汇编代码如下：

func_0060()函数是uint256[3]所对应的空间的申请，返回值表示solidity中的m1，实际上m1就是一个memory的指针。

var var2 = var1;对应solidity中的uint256[3] memory m2 = m1; 可见这里并没有复制数组的每一个元素，而仅仅是负值了指针本身。

所以memory→memory是浅拷贝。

contract Contract {
    function main() {
        ......
        func_0035();
        stop();
    }
    
    function func_0035() {
        var var0 = 0x3b;
        var0 = func_0060();
        var var1 = var0;
        var var2 = var1;
        var var3 = 0x01;
    
        if (var3 < 0x03) {
            storage[0x00] = memory[var3 * 0x20 + var2:var3 * 0x20 + var2 + 0x20];
            return;
        } else {
           ......
        }
    }
    
    function func_0060() returns (var r0) {
        var temp0 = memory[0x40:0x60];
        memory[0x40:0x60] = temp0 + 0x60;
        memory[temp0:temp0 + 0x03 * 0x20] = msg.data[msg.data.length:msg.data.length + 0x03 * 0x20];
        return temp0;
    }
}

contract Test {
    uint256[3] storage_numbers;

    function test() public {
        uint256[3] storage local = storage_numbers;
        uint256[3] memory m;
        storage_numbers = m;
        //local = m;  // compile failed
    }
}

memory→local storage的赋值无法通过编译：

Type uint256[3] memory is not implicitly convertible to expected type uint256[3] storage pointer.

我们来看memory→storage的情况。

function func_0051()是为m在memory内申请空间。主要的赋值代码在func_0073。

我们看到storage[temp5] = memory[temp4:temp4 + 0x20];这个赋值语句在一个goto循环里。所以，m的每一个元素都会被复制到storage_numbers之中。

可见memory→storage是深拷贝。

contract Contract {
    function main() {
        ......
        func_0035();
        stop();
    }
    
    function func_0035() {
        var var0 = 0x00;
        var var1 = 0x3d;
        var1 = func_0051();
        var var2 = 0x4c;
        var var3 = 0x00;
        var var4 = var1;
        var var5 = 0x03;
        var2 = func_0073(var3, var4, var5);
    }
    
    function func_0051() returns (var r0) {
        var temp0 = memory[0x40:0x60];
        memory[0x40:0x60] = temp0 + 0x60;
        memory[temp0:temp0 + 0x03 * 0x20] = msg.data[msg.data.length:msg.data.length + 0x03 * 0x20];
        return temp0;
    }
    
    function func_0073(var arg0, var arg1, var arg2) returns (var r0) {
        var var0 = arg0;
        var temp0 = arg1;
        arg1 = var0 + 0x03;
        var var1 = temp0;
    
        if (!arg2) {
        label_009F:
            ......
        } else {
            var temp2 = arg2;
            var temp3 = var1;
            arg2 = temp3;
            var1 = arg2 + temp2 * 0x20;
        
            if (var1 <= arg2) {
            label_009E:
                goto label_009F;
            } else {
            label_008D:
                var temp4 = arg2;
                var temp5 = var0;
                storage[temp5] = memory[temp4:temp4 + 0x20];
                arg2 = temp4 + 0x20;
                var1 = var1;
                var0 = temp5 + 0x01;
            
                if (var1 <= arg2) { goto label_009E; }
                else { goto label_008D; }
            }
        }
    }
}

contract Test {
    uint256[3] storage_numbers;

    function test(uint256[3] calldata data) public {
        uint256[3] storage local = storage_numbers;
        storage_numbers = data;
        //local = data;  // compile failed
    }
}

calldata→local storage的赋值无法通过编译：

Type uint256[3] calldata is not implicitly convertible to expected type uint256[3] storage pointer.

我们来看calldata→storage的情况。

主要关注func_0064，我们可以看到storage[temp5] = msg.data[temp4:temp4 + 0x20];在一个goto循环之中，说明calldata数组中的每个元素都会被复制到storage中。

可见calldata→storage是深拷贝。

contract Contract {
    function main() {
        ......
        func_0045(var2);
        stop();
    }
    
    function func_0045(var arg0) {
        var var0 = 0x00;
        var var1 = 0x005f;
        var var2 = 0x00;
        var var3 = arg0;
        var var4 = 0x03;
        var1 = func_0064(var2, var3, var4);
    }
    
    function func_0064(var arg0, var arg1, var arg2) returns (var r0) {
        var var0 = arg0;
        var temp0 = arg1;
        arg1 = var0 + 0x03;
        var var1 = temp0;
    
        if (!arg2) {
        label_0093:
            ......
        } else {
            var temp2 = arg2;
            var temp3 = var1;
            arg2 = temp3;
            var1 = arg2 + temp2 * 0x20;
        
            if (var1 <= arg2) {
            label_0092:
                goto label_0093;
            } else {
            label_0080:
                var temp4 = arg2;
                var temp5 = var0;
                storage[temp5] = msg.data[temp4:temp4 + 0x20];
                arg2 = temp4 + 0x20;
                var0 = temp5 + 0x01;
                var1 = var1;
            
                if (var1 <= arg2) { goto label_0092; }
                else { goto label_0080; }
            }
        }
    }
}

contract Test {
    uint256 n;

    function test(uint256[3] calldata data) public {
        uint256[3] memory m;
        m = data;

        // add this to avoid being opt out
        n = m[1];
    }
}

反汇编代码如下，

我们看到func_0045中有这样一个语句：

memory[temp0:temp0 + 0x20 * 0x03] = msg.data[arg0:arg0 + 0x20 * 0x03];

0x20是uint256的字节数，0x03表示数组有3个元素。显然这句话是把整个数组都从calldata复制到了memory中。

可见calldata→memory是深拷贝。

contract Contract {
    function main() {
        ......
        var2 = func_00FF(var3, var4);
        func_0045(var2);
        stop();
    }
    
    function func_0045(var arg0) {
        var var0 = 0x0054;
        var0 = func_00B1();
        var temp0 = memory[0x40:0x60];
        memory[0x40:0x60] = temp0 + 0x20 * 0x03;
        memory[temp0:temp0 + 0x20 * 0x03] = msg.data[arg0:arg0 + 0x20 * 0x03];
        memory[temp0 + 0x20 * 0x03:temp0 + 0x20 * 0x03 + 0x20] = 0x00;
        var0 = temp0;
        var var1 = var0;
        var var2 = 0x01;
    
        if (var2 < 0x03) {
            storage[0x00] = memory[var2 * 0x20 + var1:var2 * 0x20 + var1 + 0x20];
            return;
        } else {
            var var3 = 0x00a1;
            memory[0x00:0x20] = 0x4e487b7100000000000000000000000000000000000000000000000000000000;
            memory[0x04:0x24] = 0x32;
            revert(memory[0x00:0x24]);
        }
    }
    
    function func_00B1() returns (var r0) {
        var temp0 = memory[0x40:0x60];
        memory[0x40:0x60] = temp0 + 0x60;
        memory[temp0:temp0 + 0x03 * 0x20] = msg.data[msg.data.length:msg.data.length + 0x03 * 0x20];
        return temp0;
    }
}

contract Test {
    uint256[3] storage_numbers;

    function test(uint256[3] calldata data) public {
        uint256[3] memory m;
        uint256[3] storage local;
        //data = storage_numbers; // compile failed
        //data = local; // compile failed
        //data = m; // compile failed
    }
}

storage、local storage、memory→calldata都无法通过编译。

Type uint256[3] storage ref is not implicitly convertible to expected type uint256[3] calldata.

Type uint256[3] storage pointer is not implicitly convertible to expected type uint256[3] calldata.

Type uint256[3] memory is not implicitly convertible to expected type uint256[3] calldata.

在solidity的官方文档中，我们可以看到calldata是不可改的，

Calldata is a non-modifiable, non-persistent area where function arguments are stored, and behaves mostly like memory.

https://docs.soliditylang.org/en/latest/types.html#data-location-and-assignment-behaviour

contract Test {
    uint256 n;

    function test(uint256[3] calldata data1, uint256[3] calldata data2) public {
        data1 = data2;

        // add this to avoid being opt out
        n = data1[1];
        //data1[1] = 100; // compile failed
    }
}

我原以为这段代码会无法通过编译，让我意外的是居然编译成功了。

data1 = data2;应该是对应func_003F中的var var0 = arg0;

这个地方显然是一个浅拷贝，calldata本身也可以看作一个指针。

在data1=data2之后，对data1的读操作都相当于对data2的读操作。

这并没有违背calldata数据不可更改的规则。

像data1[1] = 100; 这样的语句，会真正修改calldata，这是不允许的，会编译报错：

TypeError: Calldata arrays are read-only.

contract Contract {
    function main() {
        ......
        var2, var3 = func_0091(var3, var4);
        func_003F(var2, var3);
        stop();
    }
    
    function func_003F(var arg0, var arg1) {
        arg0 = arg1;
        var var0 = arg0;
        var var1 = 0x01;
    
        if (var1 < 0x03) {
            storage[0x00] = msg.data[var1 * 0x20 + var0:var1 * 0x20 + var0 + 0x20];
            return;
        } else {
            var var2 = 0x58;
            memory[0x00:0x20] = 0x4e487b7100000000000000000000000000000000000000000000000000000000;
            memory[0x04:0x24] = 0x32;
            revert(memory[0x00:0x24]);
        }
    }
    
    function func_0072(var arg0, var arg1) returns (var r0) {
        var var0 = arg1;
    
        if (var0 + 0x03 * 0x20 <= arg0) { return var0; }
    
        var var1 = 0x8a;
        revert(memory[0x00:0x00]);
    }
    
    function func_0091(var arg0, var arg1) returns (var r0, var arg0) {
        var var0 = 0x00;
        var var1 = var0;
    
        if (arg0 - arg1 i>= 0xc0) {
            var var2 = 0x00;
            var var3 = 0xb1;
            var var4 = arg0;
            var var5 = arg1 + var2;
            var3 = func_0072(var4, var5);
            var0 = var3;
            var2 = 0x60;
            var3 = 0xc0;
            var4 = arg0;
            var5 = arg1 + var2;
            var3 = func_0072(var4, var5);
            arg0 = var3;
            r0 = var0;
            return r0, arg0;
        } else {
            var2 = 0xa4;
            revert(memory[0x00:0x00]);
        }
    }
}

本文讲从EVM操作码的角度，研究storage、memory、calldata的数据拷贝。

solidity version = 0.8.15，optimizer = false，evm_version = "london"

在线反汇编 https://ethervm.io/decompile

由于字节码阅读起来较为麻烦，本文主要分析反汇编后的代码。

有兴趣的同学可以自行逐行研究evm操作码。

contract Test {
    uint256[3] storage_numbers1;
    uint256[3] storage_numbers2;

    function test() public {
        storage_numbers1 = storage_numbers2;
    }
}

反汇编代码如下，test函数大致对应func_0035(), func_0035()确认了两个数组的长度(0x03), 然后进入func_0048.

我们主要关注func_0048里的storage[temp5] = storage[temp4]; 这其实是在一个goto循环里，会把数组中storage_numbers2中的每一个元素复制到storage_numbers1中。

可见，storage之间的赋值是深拷贝。

contract Contract {
    function main() {
        ......
        func_0035();
        stop();
    }
    
    function func_0035() {
        var var0 = 0x45;
        var var1 = 0x00;
        var var2 = 0x03;
        var var3 = 0x03;
        var0 = func_0048(var1, var2, var3);
    }
    
    function func_0048(var arg0, var arg1, var arg2) returns (var r0) {
        var var0 = arg0;
        var temp0 = arg1;
        arg1 = var0 + 0x03;
        var var1 = temp0;
    
        if (!arg2) {
            ......
        } else {
            var temp2 = arg2;
            var temp3 = var1;
            arg2 = temp3;
            var1 = arg2 + temp2;
        
            if (var1 <= arg2) {
            label_0070:
                goto label_0071;
            } else {
            label_005F:
                var temp4 = arg2;
                var temp5 = var0;
                storage[temp5] = storage[temp4];
                arg2 = temp4 + 0x01;
                var1 = var1;
                var0 = temp5 + 0x01;
            
                if (var1 <= arg2) { goto label_0070; }
                else { goto label_005F; }
            }
        }
    }
}

contract Test {
    uint256[3] storage_numbers1;
    uint256 n;

    function test() public {
        uint256[3] storage local1 = storage_numbers1;
        uint256[3] storage local2 = local1;

        // add this to avoid being opt out
        n = local2[1];
    }
}

反汇编代码如下.

在汇编代码里看不到storage复制的痕迹。

solidity的两行代码对应func_0035()中的：

var var1 = var0; var var2 = var1;

local storage相当于storage的指针(storage的slot编号)，storage/local storage → local storage只是指针的赋值，显然属于浅拷贝。

contract Contract {
    function main() {
        ......
        func_0035();
        stop();
    }
    
    function func_0035() {
        var var0 = 0x00;
        var var1 = var0;
        var var2 = var1;
        var var3 = 0x01;
    
        if (var3 < 0x03) {
            storage[0x03] = storage[var3 + var2];
            return;
        } else {
            ....
        }
    }
}

contract Test {
    uint256[3] storage_numbers;

    function test() public {
        uint256[3] storage local = storage_numbers;
        storage_numbers = local;
    }
}

反汇编代码如下。

主要的拷贝逻辑在func_004A，我们看到赋值语句storage[temp4] = storage[temp3];在一个goto循环里，说明这个函数会拷贝数组中的每一个值。

显然，local storage→storage是深拷贝，过程和storage→storage类似。

contract Contract {
    function main() {
        ......
        func_0035();
        stop();
    }
    
    function func_0035() {
        var var0 = 0x00;
        var var1 = 0x46;
        var var2 = 0x00;
        var var3 = var0;
        var var4 = 0x03;
        var1 = func_004A(var2, var3, var4);
    }
    
    function func_004A(var arg0, var arg1, var arg2) returns (var r0) {
        var var0 = arg0;
        var var1 = arg1;
        arg1 = var0 + 0x03;
    
        if (!arg2) {
        label_0073:
            ......
        } else {
            var temp1 = arg2;
            var temp2 = var1;
            arg2 = temp2;
            var1 = arg2 + temp1;
        
            if (var1 <= arg2) {
            label_0072:
                goto label_0073;
            } else {
            label_0061:
                var temp3 = arg2;
                var temp4 = var0;
                storage[temp4] = storage[temp3];
                arg2 = temp3 + 0x01;
                var0 = temp4 + 0x01;
                var1 = var1;
            
                if (var1 <= arg2) { goto label_0072; }
                else { goto label_0061; }
            }
        }
    }
}

contract Test {
    uint256[3] storage_numbers;
    uint256 n;

    function test() public {
        uint256[3] storage local = storage_numbers;
        uint256[3] memory m1 = local;

        // add this to avoid being opt out
        n = m1[1];
    }
}

反汇编代码如下.

复制对应代码为memory[temp5:temp5 + 0x20] = storage[temp4];这个语句也在一个goto循环中，storage中的每一个元素都会被复制到memory中。

可见storage/local storage→memory是深拷贝。

contract Contract {
    function main() {
        ......
        func_0035();
        stop();
    }
    
    function func_0035() {
        var var0 = 0x00;
        var var1 = var0;
        var temp0 = memory[0x40:0x60];
        memory[0x40:0x60] = temp0 + 0x20 * 0x03;
        var var2 = temp0;
        var var3 = var1;
        var var5 = var2;
        var var4 = 0x03;
        var var6 = var3;
        var var7 = 0x03;
    
        if (!var7) {
        label_006E:
            ......
        } else {
            var temp1 = var5;
            var temp2 = temp1 + var7 * 0x20;
            var5 = temp2;
            var temp3 = var6;
            memory[temp1:temp1 + 0x20] = storage[temp3];
            var7 = temp1 + 0x20;
            var6 = temp3 + 0x01;
        
            if (var5 <= var7) { goto label_006E; }
        
        label_005B:
            var temp4 = var6;
            var temp5 = var7;
            memory[temp5:temp5 + 0x20] = storage[temp4];
            var7 = temp5 + 0x20;
            var6 = temp4 + 0x01;
        
            if (var5 > var7) { goto label_005B; }
            else { goto label_006E; }
        }
    }
}

contract Test {
    // uint256[3] storage_numbers;
    uint256 n;

    function test() public {
        uint256[3] memory m1;
        uint256[3] memory m2 = m1;

        // add this to avoid being opt out
        n = m2[1];
    }
}

反汇编代码如下：

func_0060()函数是uint256[3]所对应的空间的申请，返回值表示solidity中的m1，实际上m1就是一个memory的指针。

var var2 = var1;对应solidity中的uint256[3] memory m2 = m1; 可见这里并没有复制数组的每一个元素，而仅仅是负值了指针本身。

所以memory→memory是浅拷贝。

contract Contract {
    function main() {
        ......
        func_0035();
        stop();
    }
    
    function func_0035() {
        var var0 = 0x3b;
        var0 = func_0060();
        var var1 = var0;
        var var2 = var1;
        var var3 = 0x01;
    
        if (var3 < 0x03) {
            storage[0x00] = memory[var3 * 0x20 + var2:var3 * 0x20 + var2 + 0x20];
            return;
        } else {
           ......
        }
    }
    
    function func_0060() returns (var r0) {
        var temp0 = memory[0x40:0x60];
        memory[0x40:0x60] = temp0 + 0x60;
        memory[temp0:temp0 + 0x03 * 0x20] = msg.data[msg.data.length:msg.data.length + 0x03 * 0x20];
        return temp0;
    }
}

contract Test {
    uint256[3] storage_numbers;

    function test() public {
        uint256[3] storage local = storage_numbers;
        uint256[3] memory m;
        storage_numbers = m;
        //local = m;  // compile failed
    }
}

memory→local storage的赋值无法通过编译：

Type uint256[3] memory is not implicitly convertible to expected type uint256[3] storage pointer.

我们来看memory→storage的情况。

function func_0051()是为m在memory内申请空间。主要的赋值代码在func_0073。

我们看到storage[temp5] = memory[temp4:temp4 + 0x20];这个赋值语句在一个goto循环里。所以，m的每一个元素都会被复制到storage_numbers之中。

可见memory→storage是深拷贝。

contract Contract {
    function main() {
        ......
        func_0035();
        stop();
    }
    
    function func_0035() {
        var var0 = 0x00;
        var var1 = 0x3d;
        var1 = func_0051();
        var var2 = 0x4c;
        var var3 = 0x00;
        var var4 = var1;
        var var5 = 0x03;
        var2 = func_0073(var3, var4, var5);
    }
    
    function func_0051() returns (var r0) {
        var temp0 = memory[0x40:0x60];
        memory[0x40:0x60] = temp0 + 0x60;
        memory[temp0:temp0 + 0x03 * 0x20] = msg.data[msg.data.length:msg.data.length + 0x03 * 0x20];
        return temp0;
    }
    
    function func_0073(var arg0, var arg1, var arg2) returns (var r0) {
        var var0 = arg0;
        var temp0 = arg1;
        arg1 = var0 + 0x03;
        var var1 = temp0;
    
        if (!arg2) {
        label_009F:
            ......
        } else {
            var temp2 = arg2;
            var temp3 = var1;
            arg2 = temp3;
            var1 = arg2 + temp2 * 0x20;
        
            if (var1 <= arg2) {
            label_009E:
                goto label_009F;
            } else {
            label_008D:
                var temp4 = arg2;
                var temp5 = var0;
                storage[temp5] = memory[temp4:temp4 + 0x20];
                arg2 = temp4 + 0x20;
                var1 = var1;
                var0 = temp5 + 0x01;
            
                if (var1 <= arg2) { goto label_009E; }
                else { goto label_008D; }
            }
        }
    }
}

contract Test {
    uint256[3] storage_numbers;

    function test(uint256[3] calldata data) public {
        uint256[3] storage local = storage_numbers;
        storage_numbers = data;
        //local = data;  // compile failed
    }
}

calldata→local storage的赋值无法通过编译：

Type uint256[3] calldata is not implicitly convertible to expected type uint256[3] storage pointer.

我们来看calldata→storage的情况。

主要关注func_0064，我们可以看到storage[temp5] = msg.data[temp4:temp4 + 0x20];在一个goto循环之中，说明calldata数组中的每个元素都会被复制到storage中。

可见calldata→storage是深拷贝。

contract Contract {
    function main() {
        ......
        func_0045(var2);
        stop();
    }
    
    function func_0045(var arg0) {
        var var0 = 0x00;
        var var1 = 0x005f;
        var var2 = 0x00;
        var var3 = arg0;
        var var4 = 0x03;
        var1 = func_0064(var2, var3, var4);
    }
    
    function func_0064(var arg0, var arg1, var arg2) returns (var r0) {
        var var0 = arg0;
        var temp0 = arg1;
        arg1 = var0 + 0x03;
        var var1 = temp0;
    
        if (!arg2) {
        label_0093:
            ......
        } else {
            var temp2 = arg2;
            var temp3 = var1;
            arg2 = temp3;
            var1 = arg2 + temp2 * 0x20;
        
            if (var1 <= arg2) {
            label_0092:
                goto label_0093;
            } else {
            label_0080:
                var temp4 = arg2;
                var temp5 = var0;
                storage[temp5] = msg.data[temp4:temp4 + 0x20];
                arg2 = temp4 + 0x20;
                var0 = temp5 + 0x01;
                var1 = var1;
            
                if (var1 <= arg2) { goto label_0092; }
                else { goto label_0080; }
            }
        }
    }
}

contract Test {
    uint256 n;

    function test(uint256[3] calldata data) public {
        uint256[3] memory m;
        m = data;

        // add this to avoid being opt out
        n = m[1];
    }
}

反汇编代码如下，

我们看到func_0045中有这样一个语句：

memory[temp0:temp0 + 0x20 * 0x03] = msg.data[arg0:arg0 + 0x20 * 0x03];

0x20是uint256的字节数，0x03表示数组有3个元素。显然这句话是把整个数组都从calldata复制到了memory中。

可见calldata→memory是深拷贝。

contract Contract {
    function main() {
        ......
        var2 = func_00FF(var3, var4);
        func_0045(var2);
        stop();
    }
    
    function func_0045(var arg0) {
        var var0 = 0x0054;
        var0 = func_00B1();
        var temp0 = memory[0x40:0x60];
        memory[0x40:0x60] = temp0 + 0x20 * 0x03;
        memory[temp0:temp0 + 0x20 * 0x03] = msg.data[arg0:arg0 + 0x20 * 0x03];
        memory[temp0 + 0x20 * 0x03:temp0 + 0x20 * 0x03 + 0x20] = 0x00;
        var0 = temp0;
        var var1 = var0;
        var var2 = 0x01;
    
        if (var2 < 0x03) {
            storage[0x00] = memory[var2 * 0x20 + var1:var2 * 0x20 + var1 + 0x20];
            return;
        } else {
            var var3 = 0x00a1;
            memory[0x00:0x20] = 0x4e487b7100000000000000000000000000000000000000000000000000000000;
            memory[0x04:0x24] = 0x32;
            revert(memory[0x00:0x24]);
        }
    }
    
    function func_00B1() returns (var r0) {
        var temp0 = memory[0x40:0x60];
        memory[0x40:0x60] = temp0 + 0x60;
        memory[temp0:temp0 + 0x03 * 0x20] = msg.data[msg.data.length:msg.data.length + 0x03 * 0x20];
        return temp0;
    }
}

contract Test {
    uint256[3] storage_numbers;

    function test(uint256[3] calldata data) public {
        uint256[3] memory m;
        uint256[3] storage local;
        //data = storage_numbers; // compile failed
        //data = local; // compile failed
        //data = m; // compile failed
    }
}

storage、local storage、memory→calldata都无法通过编译。

Type uint256[3] storage ref is not implicitly convertible to expected type uint256[3] calldata.

Type uint256[3] storage pointer is not implicitly convertible to expected type uint256[3] calldata.

Type uint256[3] memory is not implicitly convertible to expected type uint256[3] calldata.

在solidity的官方文档中，我们可以看到calldata是不可改的，

Calldata is a non-modifiable, non-persistent area where function arguments are stored, and behaves mostly like memory.

https://docs.soliditylang.org/en/latest/types.html#data-location-and-assignment-behaviour

contract Test {
    uint256 n;

    function test(uint256[3] calldata data1, uint256[3] calldata data2) public {
        data1 = data2;

        // add this to avoid being opt out
        n = data1[1];
        //data1[1] = 100; // compile failed
    }
}

我原以为这段代码会无法通过编译，让我意外的是居然编译成功了。

data1 = data2;应该是对应func_003F中的var var0 = arg0;

这个地方显然是一个浅拷贝，calldata本身也可以看作一个指针。

在data1=data2之后，对data1的读操作都相当于对data2的读操作。

这并没有违背calldata数据不可更改的规则。

像data1[1] = 100; 这样的语句，会真正修改calldata，这是不允许的，会编译报错：

TypeError: Calldata arrays are read-only.

contract Contract {
    function main() {
        ......
        var2, var3 = func_0091(var3, var4);
        func_003F(var2, var3);
        stop();
    }
    
    function func_003F(var arg0, var arg1) {
        arg0 = arg1;
        var var0 = arg0;
        var var1 = 0x01;
    
        if (var1 < 0x03) {
            storage[0x00] = msg.data[var1 * 0x20 + var0:var1 * 0x20 + var0 + 0x20];
            return;
        } else {
            var var2 = 0x58;
            memory[0x00:0x20] = 0x4e487b7100000000000000000000000000000000000000000000000000000000;
            memory[0x04:0x24] = 0x32;
            revert(memory[0x00:0x24]);
        }
    }
    
    function func_0072(var arg0, var arg1) returns (var r0) {
        var var0 = arg1;
    
        if (var0 + 0x03 * 0x20 <= arg0) { return var0; }
    
        var var1 = 0x8a;
        revert(memory[0x00:0x00]);
    }
    
    function func_0091(var arg0, var arg1) returns (var r0, var arg0) {
        var var0 = 0x00;
        var var1 = var0;
    
        if (arg0 - arg1 i>= 0xc0) {
            var var2 = 0x00;
            var var3 = 0xb1;
            var var4 = arg0;
            var var5 = arg1 + var2;
            var3 = func_0072(var4, var5);
            var0 = var3;
            var2 = 0x60;
            var3 = 0xc0;
            var4 = arg0;
            var5 = arg1 + var2;
            var3 = func_0072(var4, var5);
            arg0 = var3;
            r0 = var0;
            return r0, arg0;
        } else {
            var2 = 0xa4;
            revert(memory[0x00:0x00]);
        }
    }
}