• LayerZero Introduction**- What is LayerZero?
  - Are we sure that a token will be released?

• How to be Eligible for the LayerZero Airdrop (guide)**- Interact with Stargate Finance: bridging and voting
  - Bridge USDC on the testnet
  - Interact with the Liquidswap Bridge by LayerZero & Pontem*- Interact with the Aptos Bridge by LayerZero- *Interact with projects on LayerZero

LayerZero is an omnichain interoperability protocol designed for lightweight message passing across chains which provides authentic and guaranteed message delivery with configurable trustlessness.
Would you like to explore this project more? Check out its white paper.

Currently LayerZero has not released any token yet, but one, with the ticker $ZRO, has already been mentioned multiple times in their docs.

ZRO token holder…seems interesting

Stargate is a fully composable liquidity transport protocol that lives at the heart of Omnichain DeFi and is the most popular application released by LazerZero Labs by total value locked.
With Stargate, users & dApps can transfer native assets cross-chain while accessing the protocol’s unified liquidity pools with instant guaranteed finality.
That being said, it is presumable that interacting with this application is one of the criteria for the future airdrop.
In order to do so, you simply need to follow the steps below:

BridgingOpen this tab, connect your wallet and bridge some funds, just select the asset you want to bridge and its network, then input its total amount and eventually click the “swap” button.
I suggest you to use the Transfer Gas Estimator that provides average gas fee estimation for transfers between networks so you can bridge funds between the ones with the lowest fees.

Transfer Panel

Transfer Gas Estimator

If you want a more guided operation, just enable “Walkthrough mode” on the top-right corner and follow the steps I show you in the pictures below:

(1) Select the asset you want to transfer

(2) Select the amount you want to send

(3) Select the network where you want to send your asset

Then just accept the transaction and that’s it, step completed, good job.

VotingBuy Stargate Finance tokens ($STG) in the way you prefer (CEXs or DEXs like Uniswap or Binance), even just 1$ is enough, and stake them here, by locking your $STG tokens you will receive veSTG, the longer the lock time, the more veSTG you will receive.
veSTG is the unit of Stargate governance voting power that you must use to vote on active proposals when available.

An example of proposal

In this step, you simply need to bridge some funds again, this time from the Ethereum Goerli Testnet to the Avalanche FUJI C-Chain (also a testnet) using the bridge built by LayerZero Labs (currently a demo version).
Just select the amount of gas and USDC you want on destination, then click the “transfer” button.

Here are some links to faucets that will give you the testnet funds required for the transaction.
Faucets: USDC, ETH and AVAX.

Add USDC to your Metamask wallet so you can easily see its balance, here are its addresses:
USDC Goerli Contract Address: 0x07865c6E87B9F70255377e024ace6630C1Eaa37F
USDC Fuji Contract Address:
0x5425890298aed601595a70AB815c96711a31Bc65

This is another bridge developed by LayerZero & Pontem that allows you to transfer tokens between multiple networks (Ethereum, Polygon and so on) to the Aptos blockchain, hence why you need an Aptos wallet, I suggest you to try the Pontem Wallet (download here).
Now that you have also an Aptos wallet (remember to import tokens, you need some gas to do so), open this tab, connect your wallets, select the asset you want to bridge and the network from which do so, input its amount and then press “transfer” to bridge the tokens from any EVM to Aptos.

Image from Pontem’s docs.

If you’re having trouble doing this step, you should definitely check the fully detailed tutorial made by the Pontem team here.

This bridge, as always made by LayerZero Labs, enables seamless asset transfers between Aptos and the world of blockchains.
The steps are once again basically the same as the bridges above: open this tab, connect your wallets, select the asset you want to bridge and the network from which do so, input its amount and then press “transfer” to bridge the funds.

Image from LayerZero Labs’ Medium

To increase your airdrop chances, you might also want to interact with other projects on LayerZero, here are some good ones:

• AngleProtocol

• MugenFinance

• Radiant Capital

• Rage Trade

This guide ends here, these are all the activities that could make you eligible for the $ZRO airdrop, but in case new airdrop strategies come out, I will keep you updated as fast as I can!

Thanks for taking the time to read this article, comment below if you have any questions. Be sure to follow me if you enjoyed this post, it helps a lot!

• LayerZero Introduction**- What is LayerZero?
  - Are we sure that a token will be released?

• How to be Eligible for the LayerZero Airdrop (guide)**- Interact with Stargate Finance: bridging and voting
  - Bridge USDC on the testnet
  - Interact with the Liquidswap Bridge by LayerZero & Pontem*- Interact with the Aptos Bridge by LayerZero- *Interact with projects on LayerZero

LayerZero is an omnichain interoperability protocol designed for lightweight message passing across chains which provides authentic and guaranteed message delivery with configurable trustlessness.
Would you like to explore this project more? Check out its white paper.

Currently LayerZero has not released any token yet, but one, with the ticker $ZRO, has already been mentioned multiple times in their docs.

ZRO token holder…seems interesting

Stargate is a fully composable liquidity transport protocol that lives at the heart of Omnichain DeFi and is the most popular application released by LazerZero Labs by total value locked.
With Stargate, users & dApps can transfer native assets cross-chain while accessing the protocol’s unified liquidity pools with instant guaranteed finality.
That being said, it is presumable that interacting with this application is one of the criteria for the future airdrop.
In order to do so, you simply need to follow the steps below:

BridgingOpen this tab, connect your wallet and bridge some funds, just select the asset you want to bridge and its network, then input its total amount and eventually click the “swap” button.
I suggest you to use the Transfer Gas Estimator that provides average gas fee estimation for transfers between networks so you can bridge funds between the ones with the lowest fees.

Transfer Panel

Transfer Gas Estimator

If you want a more guided operation, just enable “Walkthrough mode” on the top-right corner and follow the steps I show you in the pictures below:

(1) Select the asset you want to transfer

(2) Select the amount you want to send

(3) Select the network where you want to send your asset

Then just accept the transaction and that’s it, step completed, good job.

VotingBuy Stargate Finance tokens ($STG) in the way you prefer (CEXs or DEXs like Uniswap or Binance), even just 1$ is enough, and stake them here, by locking your $STG tokens you will receive veSTG, the longer the lock time, the more veSTG you will receive.
veSTG is the unit of Stargate governance voting power that you must use to vote on active proposals when available.

An example of proposal

In this step, you simply need to bridge some funds again, this time from the Ethereum Goerli Testnet to the Avalanche FUJI C-Chain (also a testnet) using the bridge built by LayerZero Labs (currently a demo version).
Just select the amount of gas and USDC you want on destination, then click the “transfer” button.

Here are some links to faucets that will give you the testnet funds required for the transaction.
Faucets: USDC, ETH and AVAX.

Add USDC to your Metamask wallet so you can easily see its balance, here are its addresses:
USDC Goerli Contract Address: 0x07865c6E87B9F70255377e024ace6630C1Eaa37F
USDC Fuji Contract Address:
0x5425890298aed601595a70AB815c96711a31Bc65

This is another bridge developed by LayerZero & Pontem that allows you to transfer tokens between multiple networks (Ethereum, Polygon and so on) to the Aptos blockchain, hence why you need an Aptos wallet, I suggest you to try the Pontem Wallet (download here).
Now that you have also an Aptos wallet (remember to import tokens, you need some gas to do so), open this tab, connect your wallets, select the asset you want to bridge and the network from which do so, input its amount and then press “transfer” to bridge the tokens from any EVM to Aptos.

Image from Pontem’s docs.

If you’re having trouble doing this step, you should definitely check the fully detailed tutorial made by the Pontem team here.

This bridge, as always made by LayerZero Labs, enables seamless asset transfers between Aptos and the world of blockchains.
The steps are once again basically the same as the bridges above: open this tab, connect your wallets, select the asset you want to bridge and the network from which do so, input its amount and then press “transfer” to bridge the funds.

Image from LayerZero Labs’ Medium

To increase your airdrop chances, you might also want to interact with other projects on LayerZero, here are some good ones:

• AngleProtocol

• MugenFinance

• Radiant Capital

• Rage Trade

This guide ends here, these are all the activities that could make you eligible for the $ZRO airdrop, but in case new airdrop strategies come out, I will keep you updated as fast as I can!

Thanks for taking the time to read this article, comment below if you have any questions. Be sure to follow me if you enjoyed this post, it helps a lot!